Kathrein UFS 902 manual TV Settings, Scart HDMI/YUV

SETTINGS

TV SETTINGS

Use the  buttons here to select the settings for your TV set.

When doing this, refer to the operating instructions for your TV set!

Video Output via

Select here the connection on the receiver to which you have connected your television. Either

SCART or HDMI/YUV

TV aspect ratio

Here you select the TV's picture format. Either

-4:3 or

-16:9

Picture format

Here you select the type of screen display, depending on the setting of your TV format:

•Pan & Scan

•Letterbox

•Automatically (only if the “16:9” TV format was selected)

•Always 16:9 (only if the “16:9” TV format was selected)

TV-Scart-Output

Select the type of video signal at the TV Scart socket here. Select the signal that your TV set can process.

-FBAS – Color Video Baseband Signal

-RGB – Red/Green/Blue signal or

-Y/C – S-Video signal (luminance/ chrominance)

HDMI/YUV format

Select here the video resolution that is to be used on your TV. Either

-1080i (resolution 1920 x 1080, half-screen images)

-576p (resolution 720 x 576, full-screen images)

-720p (resolution 1280 x 720, full-screen images) or

-Automatic

Show 4:3 event

Select here the type of screen display for 4:3 programmes on a 16:9 TV:

-normal (Pillarbox)

-stretched (Fullscreen)

-zoom in (Pan & Scan)

You can also open the settings for “Show 4:3 event” and for “HDMI/YUV Format” when viewing

by pressing the ! (green) button once.

Audio format via HDMI

Select here the type of audio signal that is to be output over the HDMI interface. Select the signal that your TV set can process.

-Decoded PCM

-S/PDIF format

64