Kathrein UFS 902 manual First Installation Channel Search, Local time offset UTC, Update time on

FIRST INSTALLATION: CHANNEL SEARCH

Press the  button twice to save the new channel. You will then move on to the next step of the first installation; the following is displayed:

Local time offset (UTC)

Use the  buttons to set the time zone variation from UTC (formerly GMT) (e.g. for Germany +1 hour).

Use the  buttons to switch to the “Automatic clock change” field. Use the

 buttons to select whether the receiver should automatically change over between summer and winter time. If “On” is selected, the receiver automatically sets itself to the right time. If you select the setting “Off”, you must make the change to and from summer time yourself, using the “Summertime”

field displayed below. Press the  buttons to make the setting.

update time on

Set the required type of time update using the  buttons. The following options are available:

- “Actual channel (Das Erste)” (the time information is taken from the channel “Das Erste” - you can change this setting later on the “Date and Time” menu) or

- “all channels” (the time information is always taken from the channel currently selected)

The time will be updated in future based on the variant you have set.

Press the ! (green) button to terminate the first installation.

28