Kathrein UFS 902 First Installation Single-cable system manual

FIRST INSTALLATION: Single-cable system (manual)

Selection “EXU 908”

When the EXU 908 single- cable matrix is being used, it is essential that the LNB is set to “Universal”!

Transmission channel

Use the  buttons to select a free available transmission channel. A maximum of eight transmission channels are available (1284, 1400, 1516, 1632, 1748, 1864, 1980 and 2096 MHz).

Secure channel with PIN

The EXU 908 single-cable matrix allows the transmission frequency to be protected by inputting a PIN. No other receiver can then use that transmission frequency unless the PIN is input.

Select the setting “Yes” using the  buttons. A line with the text “Password PIN” is then displayed. Press the  buttons to select this line. You can now use the number buttons to enter a PIN (0-255).

Test connection

When you have set a free transmission channel, press the  buttons to switch to the “Test

connection” selection field and press the  button. The receiver now tests whether a connection to the single-cable system can be established or not. As soon as the receiver has established a connection to the single-cable system, you will see the following display:

Press the  button to acknowledge this display. Then press the  button. You will be asked whether you wish to save the changes. Use the buttons to select “Yes, save changes” and confirm by pressing the  button. Now press the ! (green) button.

The receiver will automatically display the menu for the channel search. Continue with the section (Execute channel search).

If no connection to the single-cable system could be established, you will receive the message “Registration was abortive!”.

Check your settings and if necessary call for expert help.

26