Kathrein UFS 902 manual TV Connection, Audio Connection, OPTICAL/ELECTRICAL Digital Output

CONNECTION AND SETUP

TV CONNECTION

Connect the satellite receiver (HDMI or alternatively TV Scart socket) and the TV set using a HDMI or Scart cable (see “Connection Example”). If your TV is stereo, you can receive the sound in stereo via the HDMI or Scart connection.

For system reasons, the same video signals are to be found at the TV Scart socket as at the video cinch output.

AUDIO CONNECTION

If you want to play the sound on your hi-fi system, connect the audio cinch sockets to the input sockets on the hi-fi system, using an appropriate cable (see “Connection Example”).

OPTICAL/ELECTRICAL DIGITAL OUTPUT

The fibre-optic output is intended for the connection of a Dolby Digital system (see “Connection Example”).

INSERTING BATTERIES IN THE REMOTE CONTROL

Remove the cover on the rear of the remote control.

Insert the two batteries supplied into the remote control. Ensure correct polarity of the batteries; the + and - markings are indicated inside the battery compartment.

Slide the cover back into the housing until it locks in place.

9