Toshiba KV-7960A ON-SCREEN Functions, Date-Time Display, Monitor screen VCR display

Page 17

ON-SCREEN FUNCTIONS

When the power is turned ON, the time and date modes are displayed on the monitor screen (live picture). On-screen displays are not available in the event of no video input signal.

Date-Time Display

INTRODUCTION

8/28/96 WED 17:30:02 A 2

Monitor screen

VCR display

1 Date

2 Day of the week

8/28/96 WED 17:30:02 A 2

3 Time

4

Playback/Recording time

PREPARATION

1Date : Displayed with the month-day-year.

2Day of the week : Automatically set to the correct day of the week when the date is set.

3Time : Set to 24-hour cycle at factory.

It is possible to modify to 12-hour (AM/PM) cycle display.

4Playback/Recording Time : Playback or Recording time display

On-Screen Position

		8/28/96 WED
		17:30:02 A 2
8/28/96	WED	8/28/96	WED
17:30:02	A 2	17:30:02	A 2
17:30:02 A 2

8/28/96 WED 17:30:02 A 2

Press the LOCATION SELECT button to adjust the display to desirable position. The display moves in the direction shown by the arrows.

Press this button : To down

LOCATION SELECT

Press this button : To right

However, during the date-time display screen, pay attention to the following when setting the date and time display positions:

When the display is set to an end of the monitor screen as shown in the figure, synchronization instability or color flickering may occur in some monitor TVs.

PLAYBACK

OPERATION

NOTICE

16

Image 17

Contents Instruction Manual Please Read Important PrecautionsPower Sources Important Safety InstructionsPower-Cord Protection Radiators, heat registers, stovesPower Lines AccessoriesWhen the power-supply cord or plug is damaged To restore the product to its normal operationTable of Contents FeaturesFront Panel Instructions in BriefTape Remain button Time Mode / SET + buttonsCassette Compartment Display buttonRear Panel Specification of Battery Word on the Exclusive 3N-100AAS Battery PackInstallation RemovalVCR Display REW button 1PAUSE/STILL buttonPress to start play back FF buttonConnection with a Video Camera ConnectionsVideo Typical Connection with the Sequential SwitcherTo REC TRIGG. OUT OutputContents of Screen Display Alarm Recall Screen Operation Setting the ClockDate-Time Display ON-SCREEN FunctionsMonitor screen VCR display On-Screen PositionDisplay Screen Is pressed. When an alarm is Alarm numberChanges to the alarm number This function enables to indicate and record informationCounter Memory Alarm MemoryCounter Displays Code Number Condition of Abnormality Error MessageTape Remain A18 20s Fields/s Possible Continuous Virtual Real Time mode Setting the RECORDING/PLAYBACK TimeHOW to Operate 24 Hour Virtual Real Time Mode Unloading a Cassette Loading and Unloading a Video CassetteLoading a cassette Camera and monitor TV Not been removed RecordingRestart REC Setting the Restart RecordingRestart Recording Setting the Timer Program Timer RecordingDaily Timer Recording Program ScreenPower goes off and the Timer display lights VCR display Press the Timer buttonTo cancel the timer recording, press the Power button or Button twice to erasePress the Shift Button to blink the MO1 start time Weekly Timer RecordingPress the Shift ButtonGRAM.to blink PRO Example Overlapping ProgramsFR2 DLYOperation at Alarm Input Alarm RecordingAlarm Recall Display Event RecordingConnecting the Alarm Terminals Display Recording time Setting the Alarm RecordingCont ManualONE-SHOT Recording Connecting the One-shot terminalOperation of One-shot Recording Display Recording fieldsTo release the One-shot Recording mode Setting contents Buzzer Screen display Counter display How to Set to Stop at End of TapeOperation After Tape END Detection Display Operation after detection of tape endAlarm recording does not operate during auto-rewind How to Set to Auto Rewind at End of TapePress the + or SET Menu ScreenButtonREC. to select REW → How to Set to Repeat Record at End of TapeConnection with the Sequential Switcher Recording with the Sequential SwitcherTiming for Camera Switching C D a B C DRecord mode REC Trigger Output Selection in the Alarm RecordingButton to set the REC Trigger SELPlayback Tracking AdjustmentRecording time mode Time mode for playback REW Stop Using the Shuttle DialPicture Search PlayPlayback in Various Modes Press the SET button to Set the Minute to Time Date SearchSearch Operation Still picture mode Press the Play button Alarm SearchInput/Output Terminal Signal level Additional remarks Signal Levels of INPUT/OUTPUT TerminalsPress Time Mode button to go to Check the playback picture recorded in A2 hour modeA2-hour mode 10want to set to Daily and Periodic InspectionSteps to Take after Daily Checks Recording Usage frequency Time modeRequest for Periodic Checks Tape Usage FrequencyDew Condensation Installation Before Calling Service PersonnelFunction/Operation RecordingOther matters PlaybackConnector section SpecificationsAccessories Warranty card Dew caution sheetToshiba America C.P.INC