Toshiba KV-7960A instruction manual To release the One-shot Recording mode

Page 34

INTRODUCTION

Press the SHIFT button to make INTERVAL blink.

5 Press the + SET button to set the time interval be- tween the individual recording fields.

Press the DISPLAY

6 buttondisplay.twice to erase the

DISPLAY – TIME MODE + SET

S E T U P
ALARM REC TIME	15S
SPEED	A 2H
1SHOT REC FIELD	1F
INTERVAL	0.2S
RESTART REC	OFF

DISPLAY – TIME MODE +

SET

SHIFT	TRACKING
SHIFT
	LOCATION SELECT

8/28/96 WED 17:30:02 L01

SHIFT

TRACKING

TAPE END MODE	STOP
ALARM	STOP

PREPARATION

RECORDING	OPERATION

PLAYBACK	OPERATION

NOTICE

LOCATION SELECT

MENU=[DISPLAY]

7 Press the REC button.

iEach time pressing the + SET button, the display changes

as follows.

0.2s → 0.5s → 1.0s → 2.0s

iEach time pressing the – SET button, the display changes in the reverse order.

REC

Display	Time interval
0.2s	1 field per 0.2 seconds

0.5s	1 field per 0.5 seconds

1.0s	1 field per 1.0 seconds

2.0s	1 field per 2.0 seconds

8 Input from the remote control switch.

Remote control switch

To release the One-shot Recording mode

Press the or TIME MODE button to change the time display on the VCR display to a display other than L01, L02 and L03.

Note:

iOne-shot input is not accepted during recording pause.

33

Image 34

Contents Instruction Manual Important Precautions Please ReadPower-Cord Protection Important Safety InstructionsPower Sources Radiators, heat registers, stovesWhen the power-supply cord or plug is damaged AccessoriesPower Lines To restore the product to its normal operationFeatures Table of ContentsInstructions in Brief Front PanelCassette Compartment Time Mode / SET + buttonsTape Remain button Display buttonRear Panel Installation Word on the Exclusive 3N-100AAS Battery PackSpecification of Battery RemovalVCR Display Press to start play back 1PAUSE/STILL buttonREW button FF buttonConnections Connection with a Video CameraTo REC TRIGG. OUT Typical Connection with the Sequential SwitcherVideo OutputContents of Screen Display Alarm Recall Screen Setting the Clock OperationMonitor screen VCR display ON-SCREEN FunctionsDate-Time Display On-Screen PositionDisplay Screen Changes to the alarm number Alarm numberIs pressed. When an alarm is This function enables to indicate and record informationCounter Displays Alarm MemoryCounter Memory Tape Remain Error MessageCode Number Condition of Abnormality HOW to Operate 24 Hour Virtual Real Time Mode Setting the RECORDING/PLAYBACK TimeA18 20s Fields/s Possible Continuous Virtual Real Time mode Loading a cassette Loading and Unloading a Video CassetteUnloading a Cassette Recording Camera and monitor TV Not been removedRestart Recording Setting the Restart RecordingRestart REC Daily Timer Recording Timer RecordingSetting the Timer Program Program ScreenTo cancel the timer recording, press the Power button or Press the Timer buttonPower goes off and the Timer display lights VCR display Button twice to erasePress the Shift ButtonGRAM.to blink PRO Weekly Timer RecordingPress the Shift Button to blink the MO1 start time FR2 Overlapping ProgramsExample DLYAlarm Recall Display Alarm RecordingOperation at Alarm Input Event RecordingConnecting the Alarm Terminals Cont Setting the Alarm RecordingDisplay Recording time ManualOperation of One-shot Recording Connecting the One-shot terminalONE-SHOT Recording Display Recording fieldsTo release the One-shot Recording mode Operation After Tape END Detection How to Set to Stop at End of TapeSetting contents Buzzer Screen display Counter display Display Operation after detection of tape endPress the + or SET How to Set to Auto Rewind at End of TapeAlarm recording does not operate during auto-rewind Menu ScreenHow to Set to Repeat Record at End of Tape ButtonREC. to select REW →Timing for Camera Switching Recording with the Sequential SwitcherConnection with the Sequential Switcher C D a B C DButton to set the REC REC Trigger Output Selection in the Alarm RecordingRecord mode Trigger SELRecording time mode Time mode for playback Tracking AdjustmentPlayback Picture Using the Shuttle DialREW Stop Search PlayPlayback in Various Modes Search Operation Time Date SearchPress the SET button to Set the Minute to Alarm Search Still picture mode Press the Play buttonSignal Levels of INPUT/OUTPUT Terminals Input/Output Terminal Signal level Additional remarksA2-hour mode 10want to set to Check the playback picture recorded in A2 hour modePress Time Mode button to go to Daily and Periodic InspectionRequest for Periodic Checks Recording Usage frequency Time modeSteps to Take after Daily Checks Tape Usage FrequencyDew Condensation Function/Operation Before Calling Service PersonnelInstallation RecordingPlayback Other mattersAccessories SpecificationsConnector section Warranty card Dew caution sheetToshiba America C.P.INC