wTAPE REMAIN button
The approximate time remaining on the tape is displayed on the counter (in a 2 hour scale using a
eCASSETTE COMPARTMENT
Insert a cassette into this compartment to load the tape.
rDISPLAY button
Press to display the MENU screen and change the settings.
tSHIFT 
/ 
button
Press to select a desired menu on the screen.
yTIME MODE 
/ SET + – buttons
•Press either of the buttons to set the recording time mode and playback time mode.
•Press either the + or the – button to set the mode and the numerical value for each menu on the screen.
uLOCATION SELECT button 
/ 
Press to change the position of superimposed characters on the screen.
iTRACKING buttons ( 
/ 
)
Adjust to eliminate noise from playback picture.
oPLAY button
Press to start the playback mode.
;STOP button
Press to stop tape running.
aPAUSE/STILL button
•Press during recording to pause recording.
•Press during playback for a still picture.
sSHUTTLE dial
Turn this dial clockwise and hold:
•To fast forward the tape during the stop mode.
•To operate the forward picture search during the play- back.
•To operate the forward slow play during the still mode.
Turn this dial counter clockwise and hold:
•To rewind the tape during the stop mode.
•To operate the reverse picture search during the play- back.
•To operate the reverse slow play during the still mode.
INTRODUCTION
PREPARATION
RECORDING | OPERATION |
PLAYBACK | OPERATION |
NOTICE
6