Toshiba KV-7960A instruction manual Connecting the Alarm Terminals

Page 31

Connecting the Alarm Terminals

iConnecting the ALARM IN/OUT terminals

Alarm switch

To alarm in

To GND




Warning		External
Warning		interface

				To alarm out
				To alarm out
	Alarm lamp or alarm buzzer

•When the alarm switch is ON, alarm recording starts. It is possible to confirm the warning from outside by connecting the switching input of external interface devices such as alarm lamp or alarm buzzer to the alarm output. Please do not use the alarm output for power source to any of external devices.

i Connecting alarm reset input

Alarm reset switch

To GND

To alarm reset

•When the alarm switch is ON, alarm recording starts. However, when a closure is applied across the ALARM RESET and GND terminals, the alarm record condition resets and the VCR returns to the original record mode it was in before the alarm condition occurred.

Note:

iWhen simultaneously connecting alarm input and alarm reset input, be sure to carefully check the voltage levels.

INTRODUCTION

PREPARATION

RECORDING

OPERATION

PLAYBACK

OPERATION

NOTICE

30

Image 31

Contents Instruction Manual Please Read Important PrecautionsRadiators, heat registers, stoves Important Safety InstructionsPower Sources Power-Cord ProtectionTo restore the product to its normal operation AccessoriesPower Lines When the power-supply cord or plug is damagedTable of Contents FeaturesFront Panel Instructions in BriefDisplay button Time Mode / SET + buttonsTape Remain button Cassette CompartmentRear Panel Removal Word on the Exclusive 3N-100AAS Battery PackSpecification of Battery InstallationVCR Display FF button 1PAUSE/STILL buttonREW button Press to start play backConnection with a Video Camera ConnectionsOutput Typical Connection with the Sequential SwitcherVideo To REC TRIGG. OUTContents of Screen Display Alarm Recall Screen Operation Setting the ClockOn-Screen Position ON-SCREEN FunctionsDate-Time Display Monitor screen VCR displayDisplay Screen This function enables to indicate and record information Alarm numberIs pressed. When an alarm is Changes to the alarm numberCounter Displays Alarm MemoryCounter Memory Tape Remain Error MessageCode Number Condition of Abnormality HOW to Operate 24 Hour Virtual Real Time Mode Setting the RECORDING/PLAYBACK TimeA18 20s Fields/s Possible Continuous Virtual Real Time mode Loading a cassette Loading and Unloading a Video CassetteUnloading a Cassette Camera and monitor TV Not been removed RecordingRestart Recording Setting the Restart RecordingRestart REC Program Screen Timer RecordingSetting the Timer Program Daily Timer RecordingButton twice to erase Press the Timer buttonPower goes off and the Timer display lights VCR display To cancel the timer recording, press the Power button orPress the Shift ButtonGRAM.to blink PRO Weekly Timer RecordingPress the Shift Button to blink the MO1 start time DLY Overlapping ProgramsExample FR2Event Recording Alarm RecordingOperation at Alarm Input Alarm Recall DisplayConnecting the Alarm Terminals Manual Setting the Alarm RecordingDisplay Recording time ContDisplay Recording fields Connecting the One-shot terminalONE-SHOT Recording Operation of One-shot RecordingTo release the One-shot Recording mode Display Operation after detection of tape end How to Set to Stop at End of TapeSetting contents Buzzer Screen display Counter display Operation After Tape END DetectionMenu Screen How to Set to Auto Rewind at End of TapeAlarm recording does not operate during auto-rewind Press the + or SETButtonREC. to select REW → How to Set to Repeat Record at End of TapeC D a B C D Recording with the Sequential SwitcherConnection with the Sequential Switcher Timing for Camera SwitchingTrigger SEL REC Trigger Output Selection in the Alarm RecordingRecord mode Button to set the RECRecording time mode Time mode for playback Tracking AdjustmentPlayback Search Play Using the Shuttle DialREW Stop PicturePlayback in Various Modes Search Operation Time Date SearchPress the SET button to Set the Minute to Still picture mode Press the Play button Alarm SearchInput/Output Terminal Signal level Additional remarks Signal Levels of INPUT/OUTPUT TerminalsDaily and Periodic Inspection Check the playback picture recorded in A2 hour modePress Time Mode button to go to A2-hour mode 10want to set toTape Usage Frequency Recording Usage frequency Time modeSteps to Take after Daily Checks Request for Periodic ChecksDew Condensation Recording Before Calling Service PersonnelInstallation Function/OperationOther matters PlaybackWarranty card Dew caution sheet SpecificationsConnector section AccessoriesToshiba America C.P.INC