INTRODUCTION
Setting the Alarm Recording
Press the DISPLAY
1 button.
M E N U
CLOCK ADJUST
Press the 
SHIFT button to blink SPEED and press
4 the + SET button to set the recording time mode.
DISPLAY – TIME MODE +
SET
SHIFT | TRACKING |
|
SETUP DISPLAY MODE PROGRAM ALARM RECALL TIME DATE SEARCH
DISPLAY – TIME MODE +
S E T U P |
|
|
ALARM REC TIME | 15S |
|
SPEED | A 2H |
|
1SHOT REC FIELD | 1F |
|
INTERVAL 0.2S |
| |
RESTART REC | OFF |
|
LOCATION SELECT |
END=[DISPLAY]
SET
SHIFT
TRACKING
TAPE END MODE | STOP |
ALARM | STOP |
PREPARATION
LOCATION SELECT
Press the 
SHIFT
2 button to blink SETUP and press the + SET button.
DISPLAY – TIME MODE +
M E N U
CLOCK ADJUST
SETUP DISPLAY MODE PROGRAM ALARM RECALL
MENU=[DISPLAY]
i | Each time the + SET button is pressed, the display |
| changes as follows. |
| A2H → A6H → A12H → A18H → A24H → A2H |
i | Each time the – SET button is pressed, the display |
SET
SHIFT
TRACKING
TIME DATE SEARCH
changes in the reverse order. |
LOCATION SELECT
END=[DISPLAY]
Press the + SET button to set the alarm recording |
| |||
3 time. |
|
|
|
|
|
|
|
| |
| S E T U P |
|
| |
|
| ALARM REC TIME |
|
|
| 15S |
| ||
Press the 
SHIFT button to blink TAPE END
5 ALARM and press the + SET button to set operation after tape end detection.
|
|
| SPEED | A 2H |
|
|
| 1SHOT REC FIELD | 1F |
DISPLAY | – TIME MODE + |
| INTERVAL 0.2S | |
| SET |
| RESTART REC | OFF |
| SHIFT | TRACKING | TAPE END MODE | STOP |
|
| |||
DISPLAY – TIME MODE +
| S E T U P |
| |
ALARM | REC | TIME | 15S |
|
| SPEED | A 2H |
1SHOT | REC | FIELD | 1F |
|
| INTERVAL | 0.2S |
ALARM | STOP |
LOCATION SELECT |
|
MENU=[DISPLAY] | |
SET
SHIFT
TRACKING
RESTART REC | OFF |
TAPE END MODE | STOP |
ALARM | STOP |
iEach time the + SET button is pressed, the display
changes as follows.
15S → 30S → 1M00S → 1M30S → 2M00S → 2M30S → 3M00S → 6M00S → CONT. → MANUAL → 5S → 15S
iEach time the – SET button is pressed, the display changes in the reverse direction.
Display | Recording time |
5S | 5 seconds recording |
15S | 15 seconds recording |
30S | 30 seconds recording |
1M00S | 1 minute recording |
LOCATION SELECT
MENU=[DISPLAY]
iEach time the + SET button is pressed, the display changes as follows.
→STOP → CONT. 
STOP ... Stops at tape end when any alarm condition has occurred.
CONT .. Performs an operation selected by TAPE END MODE on MENU SCREEN when tape end is detected.
PLAYBACK | OPERATION |
NOTICE
1M30S | 1 minute and 30 seconds recording |
2M00S | 2 minutes recording |
2M30S | 2 minutes and 30 seconds recording |
|
|
3M00S | 3 minutes recording |
6M00S | 6 minutes recording |
CONT. | Recording to tape end |
MANUAL | Recording during alarm input |
Press the DISPLAY
6 buttondisplay.twice to erase the
DISPLAY – TIME MODE +
SET
SHIFT | TRACKING |
| |
| LOCATION SELECT |
8/28/96 WED 17:30:02 A 2
31