Toshiba KV-7960A instruction manual Alarm Search, Still picture mode Press the Play button

Page 44

INTRODUCTION

ALARM SEARCH

With the alarm search function, it is possible to search for alarm that has been recorded on the tape.

PREPARATION

Search Operation

1 Press the STOP button.

H

ALARM

REC SP

PLAY

STOP

Press the COUNTER MEMORY button twice to make

2 “ALARM M” to light.

ALARM	ALARM	H
M	ALARM
	SP

COUNTER

MEMORY ALARM RESET

Turn the SHUTTLE dial to set rewind or fast forward.

3		ALARM	ALARM	H
	PLAY	M	ALARM
	PLAY		SP
REV	FWD	When the tape reaches the
		alarm recorded position, The
		VCR automatically enters the
		still picture mode.
4 Press the PLAY button.
PLAY	STOP

PLAYBACK	OPERATION

NOTICE

Notes:

In the cases shown below, Alarm Memory search may be not carried out.

iIf the alarm recording is not carried out for more than those listed in the following chart then, the alarm may be skipped.

iIf the alarm recording interval is not left for more than those listed in the following chart then, the alarm may be skipped.

iIf there is not enough time between the beginning of the alarm search and the first alarm activation. If the time period is shorter than those listed in the following chart then, the first alarm may be skipped.

Record	Minimum alarm recording	Minimum alarm recording	Minimum recording time needed between
mode	time needed	interval needed	start of search and first alarm activations
A2 or A6	2 s	7 s	5 s
A12	15 s	50 s	35 s
A18	7 s	25 s	15 s
A24	30 s	95 s	65 s

43

Image 44

Contents Instruction Manual Important Precautions Please ReadImportant Safety Instructions Power SourcesPower-Cord Protection Radiators, heat registers, stovesAccessories Power LinesWhen the power-supply cord or plug is damaged To restore the product to its normal operationFeatures Table of ContentsInstructions in Brief Front PanelTime Mode / SET + buttons Tape Remain buttonCassette Compartment Display buttonRear Panel Word on the Exclusive 3N-100AAS Battery Pack Specification of BatteryInstallation RemovalVCR Display 1PAUSE/STILL button REW buttonPress to start play back FF buttonConnections Connection with a Video CameraTypical Connection with the Sequential Switcher VideoTo REC TRIGG. OUT OutputContents of Screen Display Alarm Recall Screen Setting the Clock OperationON-SCREEN Functions Date-Time DisplayMonitor screen VCR display On-Screen PositionDisplay Screen Alarm number Is pressed. When an alarm isChanges to the alarm number This function enables to indicate and record informationCounter Memory Alarm MemoryCounter Displays Code Number Condition of Abnormality Error MessageTape Remain A18 20s Fields/s Possible Continuous Virtual Real Time mode Setting the RECORDING/PLAYBACK TimeHOW to Operate 24 Hour Virtual Real Time Mode Unloading a Cassette Loading and Unloading a Video CassetteLoading a cassette Recording Camera and monitor TV Not been removedRestart REC Setting the Restart RecordingRestart Recording Timer Recording Setting the Timer ProgramDaily Timer Recording Program ScreenPress the Timer button Power goes off and the Timer display lights VCR displayTo cancel the timer recording, press the Power button or Button twice to erasePress the Shift Button to blink the MO1 start time Weekly Timer RecordingPress the Shift ButtonGRAM.to blink PRO Overlapping Programs ExampleFR2 DLYAlarm Recording Operation at Alarm InputAlarm Recall Display Event RecordingConnecting the Alarm Terminals Setting the Alarm Recording Display Recording timeCont ManualConnecting the One-shot terminal ONE-SHOT RecordingOperation of One-shot Recording Display Recording fieldsTo release the One-shot Recording mode How to Set to Stop at End of Tape Setting contents Buzzer Screen display Counter displayOperation After Tape END Detection Display Operation after detection of tape endHow to Set to Auto Rewind at End of Tape Alarm recording does not operate during auto-rewindPress the + or SET Menu ScreenHow to Set to Repeat Record at End of Tape ButtonREC. to select REW →Recording with the Sequential Switcher Connection with the Sequential SwitcherTiming for Camera Switching C D a B C DREC Trigger Output Selection in the Alarm Recording Record modeButton to set the REC Trigger SELPlayback Tracking AdjustmentRecording time mode Time mode for playback Using the Shuttle Dial REW StopPicture Search PlayPlayback in Various Modes Press the SET button to Set the Minute to Time Date SearchSearch Operation Alarm Search Still picture mode Press the Play buttonSignal Levels of INPUT/OUTPUT Terminals Input/Output Terminal Signal level Additional remarksCheck the playback picture recorded in A2 hour mode Press Time Mode button to go toA2-hour mode 10want to set to Daily and Periodic InspectionRecording Usage frequency Time mode Steps to Take after Daily ChecksRequest for Periodic Checks Tape Usage FrequencyDew Condensation Before Calling Service Personnel InstallationFunction/Operation RecordingPlayback Other mattersSpecifications Connector sectionAccessories Warranty card Dew caution sheetToshiba America C.P.INC