Toshiba KV-7960A Before Calling Service Personnel, Installation, Function/Operation, Recording

Page 49

BEFORE CALLING SERVICE PERSONNEL

If you suspect a breakdown, check the following points before calling your serviceman for follow-up service.

Installation

Power does not go ON.	i Is the power plug securely inserted to an AC outlet?

There is no camera picture.	i Is the VCR properly connected to the TV, video camera and other
	devices?
	i Is there any problem with the connection of the connecting cords?

The camera picture is indistinct.	i Is the camera properly focused?

Function/Operation

The VCR does not operate even when the control	i Has a video tape been inserted?
buttons are pressed.	i Is the REMOTE switch OFF?
	i Is the Dew lamp blinking?
	The VCR is not operating because the safety functions are operat-
	ing. Wait until the blinking stops with the Power switch ON.

The clock does not run after restoration of power	i Has the VCR’s power plug been removed from the AC outlet for a
following a power failure.	long period? Insert the power plug in the AC outlet and carry out
	continuous charging for 48 hours or longer.
The buzzer does not sound.	i Is the BUZZER switch set to OFF? If off, the buzzer does not work.

Recording

Playback, fast forward and rewind are possible but	i Is the tab on the video cassette broken off?
recording is not possible.	i Is the video tape at tape end?

Recording has stopped.	i Have more than 10 minutes passed since pressing the PAUSE
	button during recording?

Nothing is being recorded.	i Have you been carrying out regular daily checks?
	If this phenomenon occurs often, something may be broken.
	Consult with your dealer.

Not possible to record after restoring power following	i Is restart recording OFF?
a power failure.	i Has the power failure lasted for longer than 10 days?
Repeat recording is not possible.	i Is TAPE END MODE on REW→REC?
	i Has one of the operations buttons been pressed during automatic
	rewind?
	i Is TAPE END ALARM on CONT?

Timer recording is not possible.	i Is the present time setting correct?
	i Is the timer setting correct?
	i Has the TIMER button been pressed?
	i Did a power failure continue for a long period after the timer was
	set?
	i Has the POWER switch been turned ON?
	i Has the power plug been removed from the AC outlet?
Alarm recording is not possible.	i Are the alarm sensor and the alarm input properly connected?

INTRODUCTION

PREPARATION

RECORDING

OPERATION

PLAYBACK

OPERATION

NOTICE

48

Image 49

Contents Instruction Manual Please Read Important PrecautionsPower Sources Important Safety InstructionsPower-Cord Protection Radiators, heat registers, stovesPower Lines AccessoriesWhen the power-supply cord or plug is damaged To restore the product to its normal operationTable of Contents FeaturesFront Panel Instructions in BriefTape Remain button Time Mode / SET + buttonsCassette Compartment Display buttonRear Panel Specification of Battery Word on the Exclusive 3N-100AAS Battery PackInstallation RemovalVCR Display REW button 1PAUSE/STILL buttonPress to start play back FF buttonConnection with a Video Camera ConnectionsVideo Typical Connection with the Sequential SwitcherTo REC TRIGG. OUT OutputContents of Screen Display Alarm Recall Screen Operation Setting the ClockDate-Time Display ON-SCREEN FunctionsMonitor screen VCR display On-Screen PositionDisplay Screen Is pressed. When an alarm is Alarm numberChanges to the alarm number This function enables to indicate and record informationCounter Displays Alarm MemoryCounter Memory Tape Remain Error MessageCode Number Condition of Abnormality HOW to Operate 24 Hour Virtual Real Time Mode Setting the RECORDING/PLAYBACK TimeA18 20s Fields/s Possible Continuous Virtual Real Time mode Loading a cassette Loading and Unloading a Video CassetteUnloading a Cassette Camera and monitor TV Not been removed RecordingRestart Recording Setting the Restart RecordingRestart REC Setting the Timer Program Timer RecordingDaily Timer Recording Program ScreenPower goes off and the Timer display lights VCR display Press the Timer buttonTo cancel the timer recording, press the Power button or Button twice to erasePress the Shift ButtonGRAM.to blink PRO Weekly Timer RecordingPress the Shift Button to blink the MO1 start time Example Overlapping ProgramsFR2 DLYOperation at Alarm Input Alarm RecordingAlarm Recall Display Event RecordingConnecting the Alarm Terminals Display Recording time Setting the Alarm RecordingCont ManualONE-SHOT Recording Connecting the One-shot terminalOperation of One-shot Recording Display Recording fieldsTo release the One-shot Recording mode Setting contents Buzzer Screen display Counter display How to Set to Stop at End of TapeOperation After Tape END Detection Display Operation after detection of tape endAlarm recording does not operate during auto-rewind How to Set to Auto Rewind at End of TapePress the + or SET Menu ScreenButtonREC. to select REW → How to Set to Repeat Record at End of TapeConnection with the Sequential Switcher Recording with the Sequential SwitcherTiming for Camera Switching C D a B C DRecord mode REC Trigger Output Selection in the Alarm RecordingButton to set the REC Trigger SELRecording time mode Time mode for playback Tracking AdjustmentPlayback REW Stop Using the Shuttle DialPicture Search PlayPlayback in Various Modes Search Operation Time Date SearchPress the SET button to Set the Minute to Still picture mode Press the Play button Alarm SearchInput/Output Terminal Signal level Additional remarks Signal Levels of INPUT/OUTPUT TerminalsPress Time Mode button to go to Check the playback picture recorded in A2 hour modeA2-hour mode 10want to set to Daily and Periodic InspectionSteps to Take after Daily Checks Recording Usage frequency Time modeRequest for Periodic Checks Tape Usage FrequencyDew Condensation Installation Before Calling Service PersonnelFunction/Operation RecordingOther matters PlaybackConnector section SpecificationsAccessories Warranty card Dew caution sheetToshiba America C.P.INC