Connecting your TV
If you haven’t connected electronic equipment before, or you have been frustrated in the past, you may wish to read this section. (Cables are not supplied.)
• | A coaxial cable is the standard cable that comes in from your |
|
| antenna or cable converter box. Coaxial cables use “F” connectors. |
|
• | Standard A/V (audio/video) cables are usually color coded |
|
| according to use: yellow for video and red and white for audio. The |
|
| red audio cable is for the stereo right channel, and the white audio |
|
| cable is for the stereo left (or mono) channel. If you look at the rear |
|
| panel of the TV, you will see that the terminals are color coded in |
|
| the same manner as the cables. |
|
• |
| |
| can only be used with | Caution: |
• | Component video cables come in sets of three and provide the best | |
| picture performance. Component video cables can only be used | Do not plug the TV in until you have finished |
| with component video compatible components. | connecting all of your equipment. |
Safeguards
Toshiba
Important
Welcome to
ANTENNACable
Coaxial Cable
AUDIO
Cables
Component video
Cables
VIDEO
Cable
Connecting a VCR
This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel.
TV
You will need:
•two coaxial cables
•one set of standard A/V cables
your TV
Remote Control
Connecting
Using the
IN
Y
VIDEO
ANT (75Ω)
L/MONO | PB | |
| ||
AUDIO | PR | |
|
| |
| R |
|
| VIDEO 1 | VIDEO 2 |
Cable
IN
IN from ANT | OUT to TV |
OUT
OUT
VIDEO
L/MONO
AUDIO
R
Stereo VCR
Note:
If using a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. For better picture quality, if your VCR has S- video, you can use an
your TV
Features
Setting up
Using the TV’s
CH 3 | L | R | |
CH 4 | |||
VIDEO | AUDIO | ||
|
7
Appendix
3N42501B[E] | 7 | 24/2/04, 10:56 AM |