Toshiba 27A34 appendix Adding channels to the TV’s memory, Changing channels

Adding channels to the TV’s memory

Your TV will stop on specific channels that are stored in the TV’s channel memory when you press Channel + or –. Use the steps below to set all active channels in your area automatically.

Programming channels automatically

Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory auto- matically, you can add or erase channels manually.

Safeguards

T

Important

W

To add channels automatically:

1.Press MENU, then press or

2.Press or until the TV/ CABLE selection is highlighted.

3.Press or to highlight either TV or CABLE, depending on which you use.

to display the SETUP menu.

	CH
PICTURE AUDIO	SETUP OPTION
TV / CABLE	TV CABLE
CH PROGRAM	START
ADD / ERASE	ADD

Channel Numbers

oshiba

elcome to

If you use an antenna, choose TV.
If you use cable, choose CABLE.	SELECT	ADJUST

4.Press to select CH PROGRAM.

5.Press or to start channel programming. The TV will automati- cally cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory.

While the TV is cycling through the channels, the message “PROGRAMMING NOW-PLEASE WAIT” appears.

6.When channel programming is complete, the message “COMPLETED” appears.

7.Press CH + or – to view the programmed channels.

Adding and erasing channels manually

After you have programmed the channels automatically, you can add or erase specific channels manually.

To add or erase channels manually:

1.Select the channel you want to add or erase.

If adding channels, you must select the channel to add using the Channel Number buttons.

Channel +/–

Exit

Menu

your TV

Remote Control

your

Connecting

Using the

Setting

2.Press MENU, then press or to display the SETUP menu.

3.Press or to highlight ADD/

ERASE.

4.Press or to select ADD or ERASE, whichever function you want to perform.

5.Repeat steps 1-4 for other channels you want to add or erase.

	CH
PICTURE AUDIO	SETUP OPTION
TV / CABLE	CABLE
CH PROGRAM	START
ADD / ERASE	ADD ERASE
SELECT	ADJUST

TV

up

Using

Changing channels

To change to the next programmed channel:

Press Channel ▲ or ▼ on the TV or CH + or – on the remote control.

To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0-9 and 100) on the remote control.

For example, to select channel 125, press 100, 2, 5.

13

Features

the TV’s

Appendix

3N42501B[E] (P07-13) 13 24/2/04, 10:56 AM