Toshiba 13A24 manual Using the Lock Menu, To SET the on Timer, Locking Channels

USING THE LOCK MENU

The LOCK menu includes the CH LOCK, VIDEO LOCK, GAME TIMER and CHANGE PASSWORD functions.

You can use these functions after entering the correct PASSWORD. (This password is the same one selected under “SETTING THE V-CHIP” on page 10.)

LOCKING CHANNELS

With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels unless you clear the setting. You can choose to lock up to nine TV channels and nine cable channels.

1	Use the Channel Number Buttons (0–9) to display the
	television channel you wish to lock.
	Press MENU, then press SET + or – until the indicator
2
	next to “LOCK” begins to flash. Then press ENTER.
	Use the Channel Number buttons (0–9) to enter your
3
	password, then press ENTER.		LOCK
	The LOCK menu appears.
			CH LOCK
	Press SET + or – until the indicator next		VIDEO LOCK
4			GAME TIMER
			CHANGE PASSWORD
	to “CH LOCK” begins to flash, then
	press ENTER.	〈 + / – / ENTER / MENU 〉
	Press SET + or – to select:
5			CH LOCK
	• INPUT to select the channel as one to		CABLE
	be locked. Then press ENTER.		INPUT ---	---	---
	• ALL CLEAR to clear all channels from	---		---	---
		---		---	---

the list of locked channels. Then press	ALL CLEAR
	〈 + / – / ENTER / MENU 〉
ENTER.

6	Repeat steps 1 through 5 to lock other channels. When you
	are finished locking channels, press MENU repeatedly until
	the menu screen is cleared.

If you try to tune a locked channel, the TV will not display it, but will display the nearest unlocked channel.

NOTES:

•If you are accessing the LOCK menus or V-chip menus for the first time, choose a four-digit number to be your password.

•After programming CH LOCK, change channels before turning off the television.

•If you want to unlock channels, select ALL CLEAR in step 5, then press ENTER.

ENGLISH

LOCKING VIDEO INPUT	SETTING THE GAME TIMER
With the VIDEO LOCK feature, you can lock out the input	With the GAME TIMER feature, you can automatically activate
source (VIDEO) and channel 3 and 4.	the VIDEO LOCK feature (VIDEO setting) to set a time limit for
You will not be able to select the input sources with the TV/	playing a TV game (30, 60, 90, or 120 minutes).
VIDEO button or Channel buttons unless you clear the setting.

1	Press MENU, then press SET + or – until the indicator
	next to “LOCK” begins to flash, then press ENTER.
	Use the Channel Number buttons (0–9) to enter your
2
	password, then press ENTER. The LOCK menu appears.
	Press SET + or – until the indicator
3		VIDEO LOCK
	next to “VIDEO LOCK” begins to flash,	OFF
	then press ENTER.	VIDEO
		VIDEO+
4	Press SET + or – to select:	〈 + / – / ENTER / MENU 〉
	• OFF: Unlocks all video input sources.
	• VIDEO: Locks VIDEO.
	• VIDEO +: Locks VIDEO, channel 3 and channel 4.
	This option should be used if you use the antenna
	to play a video tape.

5 Press MENU repeatedly until the menu screen is cleared.

NOTE:

After programming VIDEO LOCK, change channels or activate the TV/VIDEO key before turning off the television.

TO SET THE ON TIMER

1	Press MENU, then press SET + or – until the indicator next to
	“LOCK” begins to flash, then press ENTER.
	Use the Channel Number buttons (0–9) to enter your pass-
2
	word, then press ENTER. The LOCK menu appears.
	Press SET + or – until the indicator next to	￿￿￿￿￿￿￿￿￿
3
	“GAME TIMER” begins to flash, then press
	ENTER.
	Press SET + or – to select a time limit
4		〈 ￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉
	(30 minutes, 60 minutes, 90 minutes, 120
	minutes or OFF).
	Press MENU repeatedly until the menu screen is cleared.
5
	After the GAME TIMER is programmed, the display will ap-
	pear briefly every ten minutes to remind you that the GAME
	TIMER is operating. When the programmed end time is
	reached, the display will change the channel automatically.

This feature allows you to program the TV to turn on automatically at a set time and channel.

NOTE: After a power failure or disconnection of the power, the timer setting will be lost.

1	Press MENU, then press SET + or – until	ON TIMER		4	Press SET + or – to set the desired	ON TIMER
	the indicator next to “ON TIMER” begins	HOUR	00h		channel, then press ENTER.	HOUR	08h
	to flash. Then press ENTER.	MINUTE	00m			MINUTE	15m
		CH 002	CANCEL
	The ON TIMER menu appears.					CH 125	SET
		〈 + / — / ENTER / MENU 〉				〈 + / — / ENTER / MENU 〉

2

3

Press SET + or – to set the desired hour (0–12), then press ENTER.

Press SET + or – to set the desired minute (00, 05, 10, ...55), then press ENTER.

5 Press SET + or – to select the SET mode, then press ENTER. 6 Press MENU repeatedly until the menu screen is cleared.

NOTE:

To cancel the ON TIMER, select CANCEL in step 4 above. Press MENU repeatedly until the menu screen is cleared.

11

3M12701A-E P08-12 11 5/2/04, 10:02