Divar Installation Manual Operating instructions
EN
Live, playback and search modes
Live mode
The live mode is the normal operating mode of the unit where you watch live pictures from the cameras. From the live mode you can switch to the search mode, the playback mode or to the system menu.
Access to search and playback functions may require a password. Discuss this with your administrator.
Press the search key 
to switch to the search mode. The search menu opens.
To enter the playback mode use one of the following keys:
•Press the rewind key 
to start reverse playback of recordings for the displayed cameras.
•Press the forward key 
to start playback from one minute earlier.
•Press the play key 
to resume playback from the last selected playback position.
Press the live key 
to switch back to live viewing. An alarm also switches the unit back to live viewing.
Playback mode
In playback mode the video control keys operate as follows:
•Press the rewind key 
to start reverse play of recordings. Pressing it again and again increases the display rate to a maximum and then back to normal speed again. Press the rewind key 
in the pause mode to step back one field at a time.
•Press the pause key 
to freeze the picture.
•Press the forward key 
to start forward playback of recordings. Pressing it again and again increases the display rate to a maximum and then back to normal speed again. Press the forward key 
in the pause mode to step forward one field at a time.
•Press the play key 
to resume playback.
•Press the current camera key to switch the ATM/POS display on and off.
Press the live key 
to switch back to live viewing or press the search key 
to switch to the search mode. In both cases, playback stops.
Bosch Security Systems