Divar Installation Manual Operating instructions
EN
Alarm inputs
If an input causes an alarm
•Monitors A and B can switch to a
•Monitor A: The border around the displayed cameos is red. The alarm icon is displayed in each cameo. An alarm status message is displayed.
•Monitor B: Sequenced display of
•The alarm beeper sounds. The alarm and the indicators flash.
•A controllable camera might be moved to a
Acknowledging an input alarm
1.Press the acknowledge key to acknowledge the alarm.
>The beeper is silent.
>The alarm and indicators are no longer lit.
>The alarm status message disappears.
>The
The alarm icon remains visible as long as the input causing the alarm is active.
If an alarm is not acknowledged, the beeper switches off after the dwell time but the alarm still needs to be acknowledged.
If
Motion alarm
If a motion detection signal causes an alarm
•Monitors A and B can switch to a
•Monitor A: The border around the displayed cameos is yellow. The motion icon is displayed in each cameo. An alarm status message is displayed.
•Monitor B: Sequenced display of
•The alarm beeper sounds. The motion and the indicators flash.
•A controllable camera might be moved to a
Acknowledging a motion alarm
1.Press the acknowledge key to acknowledge the alarm.
>The beeper is silent.
>The motion and indicators are no longer lit.
>The alarm status message disappears.
>The
The motion icon remains visible as long as the input causing the alarm is active.
If an alarm is not acknowledged, the beeper switches off after the dwell time but the alarm still needs to be acknowledged.
If
Using motion detection outdoors may cause false alarms because of varying light conditions.
Bosch Security Systems