Bosch Appliances Divar -Digital Versatile Recorder Rack mounting, Camera connections, Mounting

Page 34

Divar Installation Manual Hardware setup

EN 4-2

Rack mounting

The Divar can be mounted in a 19-inch rack. A rack mounting kit is supplied with the unit that includes:

•left and right rack mount ears

•four Torx screws with integrated lock washers.

•a Torx screwdriver

Mounting

1.Remove the four Torx screws (two on each side) located near the front panel on the right and left side of the housing.

2.Attach the mounting ears to each side ensuring that the lip is under the unit. Use the four Torx screws with lock washers and tighten securely.

3. Install the unit into the rack using the rack manufacturer’s supplied hardware.

When installing the assembly into the rack, be careful not to restrict airflow around the vent holes located in the side panels or to exceed the recommended operating temperature.

Camera connections

Connect cameras to the unit using 75-ohm video coaxial cables with BNC connectors. There are two BNC connectors for each camera. Either connector can receive a camera's signal. This signal is looped-through (directly connected) to the other connector, so that you can send the camera's signal to other equipment. The camera input connectors are auto-terminating, so you do not need to add a terminator to the output connector if no additional equipment is connected.

If the camera signal is looped-through to additional equipment, make sure that the end of the video line is terminated with a 75-ohm termination.

The Divar automatically configures itself as a PAL or NTSC unit. The unit determines the standard by detecting the signal format of the first connected camera (lowest camera input number).

Cameras that support the Bilinx communications standard can be directly connected to the BNC connectors if your Divar version is Bilinx-enabled.

If Bilinx cameras are looped-through to multiple Divars, only one Divar is allowed to have Bilinx enabled!

Specification

Input signal:	Composite video 1Vpp, 75 Ohm
	Embedded Bilinx command protocol (Divar Bilinx only).
Color standard:	PAL/NTSC, auto-detect.
Gain control:	Automatic or manual gain control for each video input.
Connector type:	BNC looped-through, automatic termination.

Bosch Security Systems

Image 34

Contents Divar Digital Versatile Recorder Page Digital Versatile Recorder Installation manual ChaptersIntroduction Hardware setupQuick install Operating instructionsMenu default values Using the Configuration ToolTechnical specifications Safety Precautions Divar Installation Manual Definition of terms ReferenceIcons shown on the screen Introduction Digital video recorder for security applicationsFeatures VersionsOn-screen help Package contentsInstallation environment UnpackingAssociated equipment DVD writerQuick install Quick connection Optional connections Powering upPrimary connections First-time useQuick Install Menu DAY Period Enter a Divar name to be used in the network Operating instructions Divar Bilinx Front panel controlsDivar Bilinx with internal DVD writer Indicators KeysPrimary functions Alternate functions Monitor a Viewing picturesViewing Monitor BSequence MultiscreenFull-screen Cameo assignmentPress the zoom key ZoomTo zoom in on a camera picture Press the ALT key Press the ALT key to return the keys to normal operationPlayback mode Live modeLive, playback and search modes Search mode Protecting or archiving a video recordingSearch Results Alarms and Triggers Triggers and alarmsAlarms Background eventsIf an input causes an alarm Alarm inputsMotion alarm If a motion detection signal causes an alarmDisk-full alarm Video loss alarmMultiple alarms If the loss of a video signal causes an alarmHardware setup Camera connections SpecificationRack mounting MountingConsole port connection SpecificationsMonitor connections RS232 console port socketKeyboard In RJ11 socket KBD Keyboard connectionsDivar connection Keyboard out RJ11 socket KBD OUTEthernet connection Network configurationLAN RJ-45 Ethernet socket Control port Control port 15-pole D-type socketExternal I/O connection Connecting the InputsConnecting the Alarm Outputs External I/O 25-pole D-type socketConnector unless you connect a disk array Scsi connectionMaintenance Power SupplyTesting Power supply socketDivar Installation Manual Hardware setup Menu system Setting the dynamic characteristics Accessing the menu from the unitOverview of the menu system Main Menu History Local Archiving Authenticity Check Adjust Contrast submenu Bosch Security Systems TIME/DATEExit Menu on Alarms item to Yes System Settings Playback Setup History LOG Setup Administrator Profiles Profile Override Output handling Divar Installation Manual Menu system Configuration Tool UsingGetting started Installing the Configuration ToolStarting the Configuration Tool System requirementsHow to Log To modify the Divar listMenu structure differences LoginMaximum number of users Introducing the main window Settings buttonUsing the Menu tree Overview buttonHelp button Service buttonUsing the control buttons Logout buttonUndo / Redo Refining settingsRefresh Previous / NextDivar Installation Manual Using the Configuration Tool Menu default values YYYY-MM-DD ATM/POS Divar Installation Manual Menu default values Dhcp Administrator Profiles Profile manager Divar Installation Manual Menu default values Technical specifications Electrical Mechanical Accessories OptionalEnvironmental Divar Installation Manual Technical specifications Page Bosch Security Systems B.V