RCA RCU1010RF warranty Delete an Event Timer

RCU_1010_RF_IB_RevA.qxd 9/24/03 10:31 AM Page 24

Set an Event Timer (continued)

5.The Timer 1 Key? Screen appears. Press and release the key you want to program to activate after a certain time delay. For example, to set your VCR to record, press and release the VCR component key in step 4, then the LCD RECORD key.

6.The Set Hours? Screen appears. The hour (HH) digits are flashing. The day is not used for Event Timer settings. Press and release the LCD UP or DOWN ARROW key to select the desired hour. Press and release the LCD OK key.

7.The minutes (MM) digits are now flashing. Press and release the LCD UP or DOWN ARROW key to select the minutes. Press and release the LCD OK key.

8.Press and release the LCD OK key on the Confirm to Save? Screen to confirm and save.

9.Once the first Event Timer is set, the LCD displays the Timer 2 Mode? Screen for setting the next Event Timer. If you want to set another Event Timer, repeat steps 4-8. If you do not want to set any more Event Timers, press and release the LCD EXIT key.

Note: A symbol (T) will be displayed to signify a Timer is set. The LCD touchscreen will remain on until the Timer expires.

10.The Set an Event process is now complete. To exit the Setup Mode, press and release the LCD EXIT key, followed by the LCD OK key on the Exit Setup Screen.

Delete an Event Timer

Any set Event Timer is indicated by the symbol (T) displayed above the clock on your LCD touchscreen. To delete an Event Timer, follow these steps:

Note: If no Event Timer has been previously set, this option is not shown in Setup Mode.

1.Press and hold the SETUP key on the rubber keypad for

2-3 seconds until the LED indicator light remains on and the touchscreen shows the Delete a Timer? Screen.

2.Press and release the LCD OK key.

3.The Delete 1? Screen displays the current day and the programmed HH:MM Event Timer.

4.The event number is displayed (1, 2, 3, or 4). Press and release the SETUP key repeatedly until the Event Timer you wish to delete is displayed.

5.To delete this event, press and release the LCD OK key. To cancel this operation, press and release the SETUP key repeatedly until the Exit Setup Screen is displayed. Press and release the LCD OK key.

24