RCA warranty RCU1010RFIBRevA.qxd 9/24/03 1030 AM

RCU_1010_RF_IB_RevA.qxd 9/24/03 10:30 AM Page 15

Note: To reset the current key labels within a component to their default settings, press and hold the current component key for three seconds. Resetting any key label within a component to its power-on default setting results in an automatic save for that mode. This will not affect your program codes or any Learned commands. Performing this reset will not reset the component key back to its default setting. This must be done by following the steps in the Change LCD Component Key Labels section above.

5.Press and release any of the LCD panel keys within the current mode repeatedly to select the desired key label. Each time you press a key, a different label for that key is displayed.

6.To save your new key label selections for the current mode, press and release another component key or the SETUP key. The display shows the Confirm to Save Screen. Press and release the LCD OK key to save or the LCD EXIT key to delete the changes you have made.

7.If you pressed another component key in step 6, those key labels are now displayed and you can proceed to rename them, if desired.

8.If the SETUP key was pressed in step 6, the screen returns to the Key Label Options? Screen.

9.The relabeling of keys is complete. To exit the Setup Mode, press and release the LCD EXIT key, followed by the LCD OK key on the Exit Setup Screen.

15