RCA RCU1010RF warranty Set Day and Time for LCD Display

RCU_1010_RF_IB_RevA.qxd 9/24/03 10:31 AM Page 28

LCD Touchscreen Display Time (continued)

4.Press and release the LCD OK key. The Set Time? Screen now appears in the LCD.

5.Press and release the SETUP key or the LCD UP ARROW key repeatedly until the Set LCD On Time? Screen is displayed. Press and release the LCD OK key.

6.The LCD displays the LCD On for 10 Secs Screen (or the length of time previously programmed). Press and release the LCD UP or DOWN ARROW keys to select the desired On Time. You can only change the time in 10-second increments from 10 to 90 seconds. Press and release the LCD OK key twice to confirm and save your settings on the Confirm to Save? Screen.

7.The Set More Options? Screen is displayed. The LCD Touchscreen Display Time setting is now complete. To exit the Setup Mode, press and release the LCD EXIT key, followed by the LCD OK key on the Exit Setup Screen.

Note: The 10-second display time will maximize battery life. If you have changed the LCD Touchscreen Display Time to assist in the Setup process, you may want to reset the display time back to 10 seconds once the Setup process is complete.

Set Day and Time for LCD Display

You can set the day and time the LCD displays. To set the day and time for the LCD display, follow these steps:

1.Press and hold the SETUP key on the rubber keypad for 2-3 seconds until the LED indicator light remains on and the touchscreen shows the Code Setup Mode? Screen.

2.Release the SETUP key.

3.Press and release the SETUP key repeatedly until the Set More Options? Screen appears. Press and release the LCD OK key.

4.The Set Time? Screen now appears with the current day (DAY) and time (HH:MM) in the LCD. Press and release the LCD OK key.

28