RCA RCU1010RF warranty LCD Touchscreen, LED Indicator Light, Setup Routine and Procedures

RCU_1010_RF_IB_RevA.qxd 9/24/03 10:30 AM Page 7

RCU1010RF

LEARN key

Liquid Crystal

Display (LCD)

LED indicator light

MACRO Key

BACKLIGHT key

SETUP key

Quick Access keys

LCD Touchscreen

The LCD (Liquid Crystal Display) touchscreen on your RCU1010RF acts as a “virtual keypad.” This touchscreen makes it easy to program and use your remote with many components. For the purposes of this guide, “component” refers to your electronic equipment—TV, VCR, DVD, SAT, PVR/DVR, CBL/AUX, CD and AUDIO equipment—all of which can be operated using the RCU1010RF remote control unit. When you press and release a component key on the LCD touchscreen, you put the remote in that mode (e.g., pressing the TV key puts the remote in the TV Mode), and it remains in that mode until you press and release another mode key. When you put the remote in a specific component mode, the control screen for that mode is shown on the touchscreen. For example, if you put the remote in TV Mode, the control screen you see on the touchscreen

is the TV Mode control screen. Each LCD touchscreen has a maximum of 40 keys.

The LCD touchscreen remains blank when the remote is not in use. The LCD touchscreen turns on automatically when you press and release the SETUP key, the BACKLIGHT key, or any LCD touchscreen key. The remaining rubber keys do not activate the LCD touchscreen

LED Indicator Light

The LED (Light Emitting Diode) indicator light, located at the upper right-hand side of the RCU1010RF unit, lights up whenever a rubber key or any LCD touchscreen key is pressed. The LED indicator flashes and beeps three times (approximately two seconds) to indicate any error condition.

Setup Routine and Procedures

The SETUP key is located towards the lower right-hand side of the remote. The SETUP key

is used to walk you through the steps in setting up the remote. To enter the Setup Mode, press and hold the SETUP key on the rubber keypad for 2-3 seconds until the LED indicator light remains on. Successive presses of the SETUP key walk you through all the available Setup routines.

7