RCU_1010_RF_IB_RevA.qxd 9/24/03 10:31 AM Page 34
Troubleshooting
PROBLEM
Your component does not respond but the red light inside the Remote Sender Cone lights when a key is pressed on the RCU1010RF remote control unit.
SOLUTION
•Make sure the Remote Sender Cone is within 20 feet (6.096 meters) of your component(s).
•Check to be sure the front (logo side) of the Remote Sender Cone is pointing at the front of your component(s).
•When trying to control multiple components behind a closed door (entertainment center), experiment with placement of the Remote Sender Cone. In most cases, you will be able to find correct position of the Remote Sender Cone so that you will not need to use the IR Extender.
•Make sure there is nothing blocking the Remote Sender Cone and the component(s). If something is blocking the signal, attach the IR Extender (See page 5 for information on setting up the IR Extender.)
34