RCA RCU1010RF warranty VCR/DVD Punch-through, Record Key, TV or CD/AUDIO Volume Punch-through

RCU_1010_RF_IB_RevA.qxd 9/24/03 10:31 AM Page 26

TV or CD/AUDIO Volume Punch-through (continued)

4.Press and release the SETUP key or LCD UP ARROW key repeatedly until the Set Volume TV<>Audio Screen appears. Press and release the LCD OK key.

5.The Set Volume TV<>Audio Screen remains in the display with a solid arrow indicating the current setting. Press and release the LCD LEFT or RIGHT ARROW key to select TV or AUDIO. Press and release the LCD OK key to save the selection.

•If AUDIO is selected, the display shows the Set Volume AudioMode? Screen for Audio Mode to be used for VOLUME/MUTE control. Press and release the desired Audio Mode and press and release the LCD OK key on the Confirm to Save? Screen to confirm and save.

•If TV is selected, press and release the LCD OK key on the Confirm to Save? Screen to confirm and save.

6.The LCD displays the Set More Options? Screen. To exit the Setup Mode, press and release the LCD EXIT key, followed by the LCD OK key on the Exit Setup Screen.

VCR/DVD Punch-through

Your RCU1010RF punches through the five transport keys (REVERSE, PLAY, FORWARD, STOP and PAUSE) to VCR or DVD Mode, whichever was used most recently. Punch-through to VCR or DVD transport keys on the rubber keypad is only allowed for TV, VCR, DVD and Cable Modes. The AUX, SAT and CD/AUDIO transport keys are dedicated to their programmed modes. (Note: Use VCR Mode for PVR/DVR.)

Note: The LCD shows component changes for the VCR or DVD Punch-through keys if they are pressed in other modes (e.g., if you are in Cable Mode and you press and release PLAY, either VCR or DVD is displayed in the LCD).

Record Key

In the VCR and AUDIO/CD Modes (including Punch-through), the LCD RECORD key must be pressed twice before the command is sent. This is also true if a VCR component is programmed under any other mode. The exceptions are for DVD and SAT codes, where the LCD RECORD key transmits the command after only a single RECORD keypress. (Note: A PVR/DVR operates under the VCR Mode.)

26