RCA RCU1010RF warranty Master Reset

RCU_1010_RF_IB_RevA.qxd 9/24/03 10:31 AM Page 30

Backlighting (continued)

4.The Set Time? Screen now appears in the LCD. Press and release the SETUP key or the LCD UP ARROW key repeatedly until the Set Light On Time? Screen is displayed. Press and release the LCD OK key.

5.The LCD displays the Light On for 10 Secs Screen (or the length of time previously programmed). Press and release the LCD UP or DOWN ARROW keys to select the desired On Time. You can only change the time in 10-second increments from 10 to 90 seconds.

Note: The Backlight On Time cannot be set greater than the LCD display time. Press and release the LCD OK key twice on the Confirm to Save? Screen to confirm and save your settings.

6.The Set More Options? Screen is displayed. The Backlight On Time setting is now complete. To exit the Setup Mode, press and release the LCD EXIT key, followed by the LCD OK key on the Exit Setup Screen.

Master Reset

A Master Reset returns all the RCU1010RF defaults back to the original factory settings. The Master Reset clears all customer-programmed codes, Learned commands and SmartMacros, and resets all key labels.

To perform a Master Reset, follow these steps:

1.Press and hold the SETUP key on the rubber keypad for

2-3 seconds until the LED indicator light remains on and the touchscreen shows the Code Setup Mode? Screen.

2.Release the SETUP key.

3.Press and release the SETUP key repeatedly until the Reset ALL? Screen appears.

4.Press and release the LCD OK key.

5.The LCD displays the Confirm to Reset? Screen. Press and release the LCD OK key. The Please Wait Screen appears and the LCD touchscreen turns off.

6.All settings are now reset to the factory default.

30