InFocus 560, 570 manual Arrow buttons, Select/enter, Next

Page 29

Using the LitePro

arrow buttons

The operations of the arrow buttons depend on what is displayed. When a menu is displayed, the left and right arrow buttons move the highlight bar to select a menu function. The up and down arrow buttons adjust or change the value of the highlighted function. The arrow buttons are auto-repeating; they repeat their function as long as you hold down the button.

When a computer or video image is displayed, the left and right arrow buttons perform their alternate functions, mute and mic. These are described below.

LP 560LS & LP 570LS: When a LiteShow presentation is displayed, the up and down arrow buttons perform their alternate functions, next and prev. These are described below.

select/enter

The operation of the select/enter button also depends on what is displayed. When Menu 2 or the Audio Menu is displayed, select/ enter cycles forward through the available settings for the highlighted function.

When a computer or video image is displayed, select/enter switches among the sources that are connected and enabled, such as computer(s) in Source 1 and/or 2 and video player(s) in Source 3 and/or 4. If only one source is connected, select/enter switches between the source image and the test pattern. If the test pattern is turned off, select/enter switches between the source image and a blank screen. (Connecting sources is described starting on page 5. Enabling sources is described on page 31. Turning off the test pattern is described on page 29. Video players can only be connected to the LitePro 570.)

LP 560LS & LP 570LS: When a LiteShow presentation is displayed, the select/enter button has a different function. Refer to the LiteShow User’s Guide for more information.

next

LP 560LS & LP 570LS: When a LiteShow presentation is displayed, press next to advance to the next slide in your presentation. Refer to the LiteShow User’s Guide for more information.

LitePro 560/570 User’s Guide

21

Image 29
Contents LCD Projector Users Guide Fold and tear here Page Page Certifications Declaration of Conformity Contents Power Source Safety SummaryPower Cord Do not look into the lensFuse GroundingLamp Hot SurfacesNot shown IntroductionCables and Adapters CompatibilityIf You Need Assistance Remote Control Programmer KitUsage Guidelines Image Size measured diagonally Setting Up the LiteProConnecting the LCD end of the LitePro cable Connecting an IBM-compatible desktop computer Connecting a Macintosh desktop computer Connecting an IBM-compatible laptop computer Connecting a Macintosh PowerBook Connecting a Composite Video Cable Connecting an S-Video Cable Connecting the Audio from a Video Player Connecting an external speaker Connecting a microphone Setting Up the LitePro Basic Image Adjustment Using the LiteProUsing the Remote Control Turning the LitePro OffAdjusting the Height Focusing the ImageSwitching to the Spare Lamp Switching to the Spare LampMenu Using the Remote Control ButtonsNext Arrow buttonsSelect/enter Prev VolumeMute MicStandby ProgMenu Using the MenusMaking Changes to Menu Functions Audio MenuHighlighting Menu Functions Menu 1 Functions Resetting Menu Functions to the Default SettingsRemoving the Menu from the Screen BrightnessLeft/Right SyncUp/Down Source Prompt Menu 2 FunctionsRear Projection Auto Standby Test PatternRS-232 Ntsc ResetPalette Source EnableProg Button Tracking LanguageVideo Type Text Mode and Pixel SliceSharpness CompAudio Menu Functions Volume and Audio LockBalance and Fade BassTreble Loudness Cleaning the Lens MaintenanceReplacing the Projection Lamps Opening the Lamp Door Bulb Guard Replacing Batteries in the Remote ControlReplacing the Fuse Installing New BatteriesLocating the Fuse Removing the Fuse Holder Before You Call for Assistance TroubleshootingProblem Color or VGA text not being projected Solutions to Common ProblemsProblem Nothing on screen Problem Only the test pattern is displayed Problem Image is not centered on the screenProblem Image is too wide or narrow for screen Problem Image is out of focusProblem LitePro displays vertical lines, bleeding or spots Problem Image and menus are reversed left to rightProblem Image is noisy or streaked Problem Projected colors don’t match the monitor’s colorsAppendix SpecificationsAppendix Accessories LCD Connector Cable Connector Pin AssignmentsGND Monitor and VGA ConnectorsAST Laptop Display Activation ChartFN-F1 Appendix Assistance, see Technical Support audio IndexLite show button 22 LitePro Quadra, see Macintosh Index Limited Warranty 010-0060-05 USA