Using the LitePro
Audio Menu Functions
The Audio Menu is available on LP 570 & LP 570LS only.
Volume and Audio Lock
You can adjust the volume either with the volume button on the remote or from the Audio Menu. If you want to adjust the volume for all sources and the microphone at one time, it is probably easier to use the Audio Menu. (To adjust the volume using the remote, see “volume” on page 22.)
To adjust the volume from the Audio Menu:
1.Press the menu button to display Menu 1.
2.Use the right or left arrow buttons to highlight “Audio”.
3.Press select/enter to display the Audio Menu.
4.Use the right or left arrow buttons to highlight the source (or microphone) you want to adjust.
Be sure that the microphone volume is set to a low level
before you install a microphone. If it is set too high, you may
damage the LitePro’s speakers.
5.Press the up arrow button to increase the volume. Press the down arrow button to decrease the volume.
If you want to lock the audio on one of the sources, highlight the source and press select/enter. The LitePro enables Audio Lock, placing a padlock icon above the source. When an audio source is locked, the LitePro will always play it, regardless of which source is selected.
For example, if you are using a video in addition to a computer- ized slide show in your presentation, you might want to set Audio Lock on the video source (source 3 or 4). The audio por- tion of the videotape will continue to play even when you switch over to display the slide show on the computer.
36 | LitePro 560/570 User’s Guide |