InFocus 570, 560 manual Loudness, Mute

Page 46

Using the LitePro

6.If you want to adjust the internal-to-external speaker fade, press the right arrow button to highlight the “I/E” bar. Then use the up and/or down arrow buttons to adjust the fade.

Loudness

Enabling Loudness adjusts the audio quality by enhancing the bass portion of the sound.

To enable or disable Loudness for the selected audio source:

1.Press the menu button to display Menu 1.

2.Use the right or left arrow buttons to highlight “Audio”.

3.Press select/enter to display the Audio Menu.

4.Use the right or left arrow buttons to highlight “Loudness”.

5.Press select/enter to enable or disable Loudness.

Mute

Enabling Mute turns off the audio from the selected source. You can also mute the selected source by pressing the mute button on the remote when a computer or video image is displayed.

To select the mute function:

1.Press the menu button to display Menu 1.

2.Use the right or left arrow buttons to highlight “Audio”.

3.Press select/enter to display the Audio Menu.

4.Use the right or left arrow buttons to highlight “Mute”.

5.Press select/enter to enable or disable Mute.

38

LitePro 560/570 User’s Guide

Image 46
Contents LCD Projector Users Guide Fold and tear here Page Page Certifications Declaration of Conformity Contents Power Cord Safety SummaryPower Source Do not look into the lensLamp GroundingFuse Hot SurfacesIntroduction Not shownCompatibility Cables and AdaptersUsage Guidelines Remote Control Programmer KitIf You Need Assistance Setting Up the LitePro Image Size measured diagonallyConnecting the LCD end of the LitePro cable Connecting an IBM-compatible desktop computer Connecting a Macintosh desktop computer Connecting an IBM-compatible laptop computer Connecting a Macintosh PowerBook Connecting a Composite Video Cable Connecting an S-Video Cable Connecting the Audio from a Video Player Connecting an external speaker Connecting a microphone Setting Up the LitePro Using the Remote Control Using the LiteProBasic Image Adjustment Turning the LitePro OffFocusing the Image Adjusting the HeightSwitching to the Spare Lamp Switching to the Spare LampUsing the Remote Control Buttons MenuSelect/enter Arrow buttonsNext Mute VolumePrev MicProg StandbyUsing the Menus MenuHighlighting Menu Functions Audio MenuMaking Changes to Menu Functions Removing the Menu from the Screen Resetting Menu Functions to the Default SettingsMenu 1 Functions BrightnessUp/Down SyncLeft/Right Rear Projection Menu 2 FunctionsSource Prompt RS-232 Test PatternAuto Standby Reset NtscSource Enable PaletteProg Button Language TrackingText Mode and Pixel Slice Video TypeComp SharpnessVolume and Audio Lock Audio Menu FunctionsTreble BassBalance and Fade Loudness Maintenance Cleaning the LensReplacing the Projection Lamps Opening the Lamp Door Replacing Batteries in the Remote Control Bulb GuardInstalling New Batteries Replacing the FuseLocating the Fuse Removing the Fuse Holder Troubleshooting Before You Call for AssistanceProblem Nothing on screen Solutions to Common ProblemsProblem Color or VGA text not being projected Problem Image is too wide or narrow for screen Problem Image is not centered on the screenProblem Only the test pattern is displayed Problem Image is out of focusProblem Image is noisy or streaked Problem Image and menus are reversed left to rightProblem LitePro displays vertical lines, bleeding or spots Problem Projected colors don’t match the monitor’s colorsSpecifications AppendixAppendix Accessories Cable Connector Pin Assignments LCD ConnectorMonitor and VGA Connectors GNDLaptop Display Activation Chart ASTFN-F1 Appendix Index Assistance, see Technical Support audioLite show button 22 LitePro Quadra, see Macintosh Index Limited Warranty 010-0060-05 USA