InFocus 560, 570 manual Language, Tracking

Page 41

Using the LitePro

Language

The Language function changes the language in which the LitePro menus are displayed. You can choose from English, French, German, Spanish or Italian. The default is English.

To change the language of the menus:

1.Press the menu button to display Menu 1.

2.Use the right or left arrow buttons to highlight “Menu 2”

3.Press select/enter to display Menu 2.

4.Use the right or left arrow buttons to highlight “Language”.

5.Press select/enter until the language you want is displayed. Each time you press select/enter, the LitePro immediately re-displays the menu in the selected language.

Tracking

The LitePro usually adjusts tracking automatically when you connect your computer. However, if the display shows evenly spaced, fuzzy, vertical lines or if the projected image is too wide or too narrow for the screen, you might be able to improve it by adjusting the tracking manually with the Tracking function.

To adjust the tracking:

1.Press the menu button to display Menu 1.

2.Use the right or left arrow buttons to highlight “Menu 2”.

3.Press select/enter to display Menu 2.

4.Use the right or left arrow buttons to highlight “Tracking”.

5.Press select/enter or the up arrow button to increase the tracking value. Press the down arrow button to decrease the value.

LitePro 560/570 User’s Guide

33

Image 41

Contents LCD Projector Users Guide Fold and tear here Page Page Certifications Declaration of Conformity Contents Power Source Safety SummaryPower Cord Do not look into the lensFuse GroundingLamp Hot SurfacesNot shown IntroductionCables and Adapters CompatibilityIf You Need Assistance Remote Control Programmer KitUsage Guidelines Image Size measured diagonally Setting Up the LiteProConnecting the LCD end of the LitePro cable Connecting an IBM-compatible desktop computer Connecting a Macintosh desktop computer Connecting an IBM-compatible laptop computer Connecting a Macintosh PowerBook Connecting a Composite Video Cable Connecting an S-Video Cable Connecting the Audio from a Video Player Connecting an external speaker Connecting a microphone Setting Up the LitePro Basic Image Adjustment Using the LiteProUsing the Remote Control Turning the LitePro OffAdjusting the Height Focusing the ImageSwitching to the Spare Lamp Switching to the Spare LampMenu Using the Remote Control ButtonsNext Arrow buttonsSelect/enter Prev VolumeMute MicStandby ProgMenu Using the MenusMaking Changes to Menu Functions Audio MenuHighlighting Menu Functions Menu 1 Functions Resetting Menu Functions to the Default SettingsRemoving the Menu from the Screen BrightnessLeft/Right SyncUp/Down Source Prompt Menu 2 FunctionsRear Projection Auto Standby Test PatternRS-232 Ntsc ResetPalette Source EnableProg Button Tracking LanguageVideo Type Text Mode and Pixel SliceSharpness CompAudio Menu Functions Volume and Audio LockBalance and Fade BassTreble Loudness Cleaning the Lens MaintenanceReplacing the Projection Lamps Opening the Lamp Door Bulb Guard Replacing Batteries in the Remote ControlReplacing the Fuse Installing New BatteriesLocating the Fuse Removing the Fuse Holder Before You Call for Assistance TroubleshootingProblem Color or VGA text not being projected Solutions to Common ProblemsProblem Nothing on screen Problem Only the test pattern is displayed Problem Image is not centered on the screenProblem Image is too wide or narrow for screen Problem Image is out of focusProblem LitePro displays vertical lines, bleeding or spots Problem Image and menus are reversed left to rightProblem Image is noisy or streaked Problem Projected colors don’t match the monitor’s colorsAppendix SpecificationsAppendix Accessories LCD Connector Cable Connector Pin AssignmentsGND Monitor and VGA ConnectorsAST Laptop Display Activation ChartFN-F1 Appendix Assistance, see Technical Support audio IndexLite show button 22 LitePro Quadra, see Macintosh Index Limited Warranty 010-0060-05 USA