InFocus 570, 560 manual Menu 2 Functions, Rear Projection, Source Prompt

Page 36

Using the LitePro

Menu 2 Functions

Rear Projection

When you select Rear Projection, the LitePro reverses the image so you can project from behind the screen as shown here.

To enable or disable to rear projection mode:

1.Press the menu button to display Menu 1.

2.Use the right or left arrow buttons to highlight “Menu 2”.

3.Press select/enter to display Menu 2.

4.Use the right or left arrow buttons to highlight “Rear Projection”.

5.Press select/enter to enable Rear Projection. The image immediately changes to display the mirror image. (Press select/ enter again to change it back.)

Source Prompt

When you are displaying your presentation and you press select/ enter to switch sources, the LitePro momentarily displays the name of the active source. If you don’t want this display, follow the steps below to disable the Source Prompt.

To enable or disable the Source Prompt:

1.Press the menu button to display Menu 1.

2.Use the right or left arrow buttons to highlight “Menu 2”.

3.Press select/enter to display Menu 2.

4.Use the right or left arrow buttons to highlight “Source Prompt”.

5.Press select/enter to enable or disable the Source Prompt.

28	LitePro 560/570 User’s Guide

Image 36

Contents LCD Projector Users Guide Fold and tear here Page Page Certifications Declaration of Conformity Contents Safety Summary Power SourcePower Cord Do not look into the lensGrounding FuseLamp Hot SurfacesIntroduction Not shownCompatibility Cables and AdaptersRemote Control Programmer Kit Usage GuidelinesIf You Need Assistance Setting Up the LitePro Image Size measured diagonallyConnecting the LCD end of the LitePro cable Connecting an IBM-compatible desktop computer Connecting a Macintosh desktop computer Connecting an IBM-compatible laptop computer Connecting a Macintosh PowerBook Connecting a Composite Video Cable Connecting an S-Video Cable Connecting the Audio from a Video Player Connecting an external speaker Connecting a microphone Setting Up the LitePro Using the LitePro Basic Image AdjustmentUsing the Remote Control Turning the LitePro OffFocusing the Image Adjusting the HeightSwitching to the Spare Lamp Switching to the Spare LampUsing the Remote Control Buttons MenuArrow buttons Select/enterNext Volume PrevMute MicProg StandbyUsing the Menus MenuAudio Menu Highlighting Menu FunctionsMaking Changes to Menu Functions Resetting Menu Functions to the Default Settings Menu 1 FunctionsRemoving the Menu from the Screen BrightnessSync Up/DownLeft/Right Menu 2 Functions Rear ProjectionSource Prompt Test Pattern RS-232Auto Standby Reset NtscSource Enable PaletteProg Button Language TrackingText Mode and Pixel Slice Video TypeComp SharpnessVolume and Audio Lock Audio Menu FunctionsBass TrebleBalance and Fade Loudness Maintenance Cleaning the LensReplacing the Projection Lamps Opening the Lamp Door Replacing Batteries in the Remote Control Bulb GuardInstalling New Batteries Replacing the FuseLocating the Fuse Removing the Fuse Holder Troubleshooting Before You Call for AssistanceSolutions to Common Problems Problem Nothing on screenProblem Color or VGA text not being projected Problem Image is not centered on the screen Problem Only the test pattern is displayedProblem Image is too wide or narrow for screen Problem Image is out of focusProblem Image and menus are reversed left to right Problem LitePro displays vertical lines, bleeding or spotsProblem Image is noisy or streaked Problem Projected colors don’t match the monitor’s colorsSpecifications AppendixAppendix Accessories Cable Connector Pin Assignments LCD ConnectorMonitor and VGA Connectors GNDLaptop Display Activation Chart ASTFN-F1 Appendix Index Assistance, see Technical Support audioLite show button 22 LitePro Quadra, see Macintosh Index Limited Warranty 010-0060-05 USA