InFocus 560, 570 manual Appendix

Page 59

Appendix

Temperature

Operating

Nominal 25°C *

Non-operating

0° to 60°C

Altitude

 

 

 

Operating

0 to 10,000 feet (3048 meters)

Non-operating

20,000 feet (6096 meters)

Humidity

 

 

 

Operating and non-

10 to 90% RH, non-condensing

operating

 

Dimensions

 

 

 

LitePro 560/570

20 x 11.5 x 8 inches (51 x 29 x 20 cm)

Weight

 

 

 

Unpacked

20 lbs. (8.8 kg)

As shipped

30 lbs (12.7 kg)

*Maximum operating temperature depends on altitude. At 8,000 ft, the maximum temperature is 31°C.

At 9,000 ft (2743m), the maximum temperature is 30°C. At 10,000 ft (3048m), the maximum temperature is 29°C.

52

LitePro 560/570 User’s Guide

Image 59
Contents LCD Projector Users Guide Fold and tear here Page Page Certifications Declaration of Conformity Contents Do not look into the lens Safety SummaryPower Source Power CordHot Surfaces GroundingFuse LampNot shown IntroductionCables and Adapters CompatibilityIf You Need Assistance Remote Control Programmer KitUsage Guidelines Image Size measured diagonally Setting Up the LiteProConnecting the LCD end of the LitePro cable Connecting an IBM-compatible desktop computer Connecting a Macintosh desktop computer Connecting an IBM-compatible laptop computer Connecting a Macintosh PowerBook Connecting a Composite Video Cable Connecting an S-Video Cable Connecting the Audio from a Video Player Connecting an external speaker Connecting a microphone Setting Up the LitePro Turning the LitePro Off Using the LiteProBasic Image Adjustment Using the Remote ControlAdjusting the Height Focusing the ImageSwitching to the Spare Lamp Switching to the Spare LampMenu Using the Remote Control ButtonsNext Arrow buttonsSelect/enter Mic VolumePrev MuteStandby ProgMenu Using the MenusMaking Changes to Menu Functions Audio MenuHighlighting Menu Functions Brightness Resetting Menu Functions to the Default SettingsMenu 1 Functions Removing the Menu from the ScreenLeft/Right SyncUp/Down Source Prompt Menu 2 FunctionsRear Projection Auto Standby Test PatternRS-232 Ntsc ResetPalette Source EnableProg Button Tracking LanguageVideo Type Text Mode and Pixel SliceSharpness CompAudio Menu Functions Volume and Audio LockBalance and Fade BassTreble Loudness Cleaning the Lens MaintenanceReplacing the Projection Lamps Opening the Lamp Door Bulb Guard Replacing Batteries in the Remote ControlReplacing the Fuse Installing New BatteriesLocating the Fuse Removing the Fuse Holder Before You Call for Assistance TroubleshootingProblem Color or VGA text not being projected Solutions to Common ProblemsProblem Nothing on screen Problem Image is out of focus Problem Image is not centered on the screenProblem Only the test pattern is displayed Problem Image is too wide or narrow for screenProblem Projected colors don’t match the monitor’s colors Problem Image and menus are reversed left to rightProblem LitePro displays vertical lines, bleeding or spots Problem Image is noisy or streakedAppendix SpecificationsAppendix Accessories LCD Connector Cable Connector Pin AssignmentsGND Monitor and VGA ConnectorsAST Laptop Display Activation ChartFN-F1 Appendix Assistance, see Technical Support audio IndexLite show button 22 LitePro Quadra, see Macintosh Index Limited Warranty 010-0060-05 USA