InFocus 560, 570 manual Audio Menu, Highlighting Menu Functions, Making Changes to Menu Functions

Page 33

Using the LitePro

Figure 16. Menu 2

The Audio Menu

LP 570 & LP 570LS: The Audio Menu contains controls for the LitePro 570’s audio functions. Each of these is described later in this manual in “Audio Menu Functions” starting on page 36.

To display the Audio Menu:

1.Press the menu button on the remote to display Menu 1.

2.Press the left or right arrow buttons until “Audio” is highlighted.

3.Press select/enter.

Figure 17. Audio Menu

The right side of each menu contains information about the state of the LitePro. If you need to call In Focus Technical Support for assistance, they may need to know these values.

Highlighting Menu Functions

You must highlight a function before you can change its setting.

•Use the left and right arrow buttons to highlight functions.

Making Changes to Menu Functions

When the function you want to change is highlighted, you can change the setting.

•Use the up and down arrow buttons to adjust settings up and down.

LitePro 560/570 User’s Guide

25

Image 33

Contents LCD Projector Users Guide Fold and tear here Page Page Certifications Declaration of Conformity Contents Power Source Safety SummaryPower Cord Do not look into the lensFuse GroundingLamp Hot SurfacesNot shown IntroductionCables and Adapters CompatibilityRemote Control Programmer Kit Usage GuidelinesIf You Need Assistance Image Size measured diagonally Setting Up the LiteProConnecting the LCD end of the LitePro cable Connecting an IBM-compatible desktop computer Connecting a Macintosh desktop computer Connecting an IBM-compatible laptop computer Connecting a Macintosh PowerBook Connecting a Composite Video Cable Connecting an S-Video Cable Connecting the Audio from a Video Player Connecting an external speaker Connecting a microphone Setting Up the LitePro Basic Image Adjustment Using the LiteProUsing the Remote Control Turning the LitePro OffAdjusting the Height Focusing the ImageSwitching to the Spare Lamp Switching to the Spare LampMenu Using the Remote Control ButtonsArrow buttons Select/enterNext Prev VolumeMute MicStandby ProgMenu Using the MenusAudio Menu Highlighting Menu FunctionsMaking Changes to Menu Functions Menu 1 Functions Resetting Menu Functions to the Default SettingsRemoving the Menu from the Screen BrightnessSync Up/DownLeft/Right Menu 2 Functions Rear ProjectionSource Prompt Test Pattern RS-232Auto Standby Ntsc ResetPalette Source EnableProg Button Tracking LanguageVideo Type Text Mode and Pixel SliceSharpness CompAudio Menu Functions Volume and Audio LockBass TrebleBalance and Fade Loudness Cleaning the Lens MaintenanceReplacing the Projection Lamps Opening the Lamp Door Bulb Guard Replacing Batteries in the Remote ControlReplacing the Fuse Installing New BatteriesLocating the Fuse Removing the Fuse Holder Before You Call for Assistance TroubleshootingSolutions to Common Problems Problem Nothing on screenProblem Color or VGA text not being projected Problem Only the test pattern is displayed Problem Image is not centered on the screenProblem Image is too wide or narrow for screen Problem Image is out of focusProblem LitePro displays vertical lines, bleeding or spots Problem Image and menus are reversed left to rightProblem Image is noisy or streaked Problem Projected colors don’t match the monitor’s colorsAppendix SpecificationsAppendix Accessories LCD Connector Cable Connector Pin AssignmentsGND Monitor and VGA ConnectorsAST Laptop Display Activation ChartFN-F1 Appendix Assistance, see Technical Support audio IndexLite show button 22 LitePro Quadra, see Macintosh Index Limited Warranty 010-0060-05 USA