Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen.
To correct this, besides adjusting the projecting angle of the projector, you will need to manually correct it following ONE of these steps.
• Press 
/ 
or 
/ 
on the projector to display the status bar labelled Keystone. Press 
/ 
to correct keystoning at the
top of the image. Press 
/ 
to correct keystoning at the bottom of the image.
•Press 
or 
on the remote control to display the status bar labelled Keystone, then press 
keystoning at the top of the image or press 
to correct keystoning at the bottom of the image.
C
C T
to correct
• Press 
MENU on the projector or MENU on the remote control. Go to 
Picture > Keystone and
adjust the values by pressing 
/ 
/ 
/ 
on the projector or 
Left/ 
Right on the remote control.
For example,
Keystone 
0
Keystone 
0
•Press 
/ 
on the projector or
•Press 
on the remote control or
•Press 
/ 
on the projector or 
Left on the remote control when you are in the Picture
•Press 
/ 
on the projector or
•Press 
on the remote control or
•Press 
/ 
on the projector or 
Right on the remote control when you are in the Picture
Keystone 
Keystone
+6
Operation 25