Safety Instructions (continued)
12.Always place the unit on a level, horizontal surface during operation.
-Do not place this product on an unstable cart, stand, or table. The product may fall, sustaining serious damage.
-Do not use if tilted at an angle of more than 10 degrees left to right, nor at angle of more than 15 degrees front to back. Using the unit when it is not fully horizontal may cause a malfunction of, or damage to, the lamp.
13.Do not store the projector on end vertically. Doing so may cause the unit to fall over, causing injury or resulting in damage.
14.This product is capable of displaying inverted images for ceiling mount installation. Use only BenQ’s Ceiling Mount Kit for mounting.
15.Do not step on the projector or place any objects upon it. Besides probable physical damage to the projector, doing so may result in accidents and possible injury.
16.Do not block the projection lens with any objects when the projector is under operation as this could cause the objects to become heated and deformed or even cause a fire.
17.Do not place liquids near or on the projector. Liquids spilled into the projector will void your warranty. If the projector does become wet, disconnect it from the power supply’s wall socket and call BenQ to have the projector
repaired.
18.Do not operate the projector lamp beyond the rated lamp life. Excessive operation of lamps beyond the rated life could cause them to break on rare occasions.
Safety, regulatory and legal information | 5 |