BenQ W100 user manual Pro-Picture menu

2. Pro-Picture menu

Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments are not shown on the screen.

FUNCTION	DESCRIPTION
(default setting /
value)
	The grayscale video signal is measured in IRE units. In some areas which use NTSC
IRE	TV standard, the grayscale is measured from 7.5 IRE (black) to 100 IRE (white);
	however, in other areas which use PAL equipment or Japanese NTSC standard, the
(0)
	grayscale is measured from 0 IRE (black) to 100 IRE (white). We suggest that you
	check the input source if it is started with 0 IRE or 7.5 IRE, then select accordingly.
	There are three aspect ratio settings. See "1. Selecting the aspect ratio" on page 27 for
	details.
Aspect Ratio	1. 16:9 (for a wide screen) 2. Real 3. 4:3 (for a standard screen)
(16:9)		16:9 aspect ratio is only sourced through the Component Video input when
	being fed an appropriate 16:9 aspect signal. See "Connecting a Component
	Video source device" on page 20 and "Obtaining a preferred projected image
	size" on page 13 for details.
	Adjusts the horizontal position of the
H Position	projected image.
(0)
			-30			+30
	Adjusts the vertical position of the
V Position	projected image.
(0)
				-30	+30
Phase	This function allows you to adjust the clock phase to reduce
(depends on the	image distortion.
selected input
source)
H Size	Adjusts the horizontal width of the image.
(0)
Sharpness	Adjusts the image to make it look sharper or softer.
(15)

Operation 33