BenQ W100 user manual Setting menu

Page 34

3. Setting menu

	FUNCTION	DESCRIPTION
	(default setting /	DESCRIPTION
	value)

	Mute	Toggles projector audio between on and off.
	(off)

	Volume	Adjusts audio volume level.
	(5)

	OSD Time	Sets the length of time the OSD will remain active after your last button press. The
	(10)	range is from 5 to 100 seconds.

	Quick Cooling	Enables or disables the Quick Cooling function. Selecting On enables the function and
	Quick Cooling	projector cooling time will be shortened from a normal 90-second duration to
	(off)
	(off)	approximately 30 seconds.
		approximately 30 seconds.

		Returns all settings to the factory preset values.
	Reset			The following settings will still remain: Mirror, Language, High Altitude Mode,
	Reset

		Phase and H Position.

34 Operation

Image 34

Contents Page Table of contents Safety, regulatory and legal information Safety instructionsDo not place inflammables near the projector Safety Instructions Regulatory and legal information Projector features IntroductionShipping contents Rear side Projector exterior viewFront / upper side Lower sideControls and functions ProjectorRemote control operation Remote controlReturns all settings to the factory preset values Positioning your projector Choosing a locationObtaining a preferred projected image size Safety instructions for ceiling mounting of the projectorAspect image in a 169 aspect display area Positioning your projector Installation for a 169 ratio screen Installation for a 43 ratio screen Best video quality Connecting Video source devicesConnection Better video qualityConnecting Audio Computer Connecting a DVI source deviceWith a DVI DVI-I or DVI-D cable With a VGA to DVI-A cable ProjectorConnecting a Component Video source device To connect the projector to a Component Video source deviceConnecting an S-Video source device To connect the projector to an S-Video source deviceConnecting a composite Video source device To connect the projector to an composite Video source deviceOperation Switching input signalStart up Auto-adjusting the image Adjusting the projected imageAdjusting the projection angle Fine-tuning the image size and clarityCorrecting keystone For exampleOperating in a high altitude environment Personalizing the projector menu displayOptimizing the image Selecting the aspect ratioPC/ DVI-A Signal Input Selecting an application modeOther adjustments DVI-D/ YPbPr/ S-Video/ Video Signal InputAdjusting tint Adjusting contrastAdjusting color Selecting a color temperatureShutting down the projector Using the menusDisconnect the power cord from the wall socket Menu operationMenu system Picture menu Pro-Picture menu Setting menu Advance menu Information menu Maintenance Care of the projectorLamp information Calculation of lamp hourReplacing the lamp Pull the lamp from the projector Restart the projectorIndicators Temperature informationIllustration Projector needs 90 seconds to cool down. Or Please contact your dealer for assistancePlug the power cord into the AC inlet on TroubleshootingAdjust the focus of the lens using the focus ring Projector specifications SpecificationsDimensions Supported timing for PC input Timing chartHorizontal Vertical Pixel Resolution Frequency Mode KHz MHz Supported timing for Video and S-Video inputsLimited warranty WarrantyFor other information, please visit support.BenQ.com Copyright Disclaimer