BenQ W100 user manual Picture menu

1. Picture menu

Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments are not shown on the screen.

FUNCTION	DESCRIPTION
(default setting /
value)
Application Mode	Pre-defined application modes are provided so you can optimize your projector image
(PC/DVI-A:	set-up to suit your program type.
Presentation;	You can use the remote control MODE button to select a predefined application mode
YPbPr/ S-Video/	as well. See "2. Selecting an application mode" on page 28 for details.
Video/ DVI-D: Home
Theater)
Keystone	Corrects any keystoning of the image. See "Correcting keystone" on page 25 for
(0)	details.
Color Temp	Sets a preferred color temperature. See "5. Selecting a color temperature" on page 29
(depends on the	for details.
selected Application
mode)
Brightness	Adjusts the brightness of the image. See "1. Adjusting brightness" on page 28 for
(depends on the	details.
selected input
source)
Contrast	Adjusts the degree of difference between dark and light in the image. See "2. Adjusting
(depends on the	contrast" on page 29 for details.
selected input
source)
Color	Increases or decreases the color intensity of the image. See "3. Adjusting color" on
(depends on the	page 29 for details.
selected input
source)
Tint	Adjusts the color tones of the image. See "4. Adjusting tint" on page 29 for details.
		When a Video or S-Video signal is connected, the function is only available
(50)
	with NTSC system selected.

32 Operation