Installation
B
Installation Overview
1.Determine if you are connecting to a:
a.
•Use the component video (YPbPr), HDMI, or
•If the TV has a DVI input, connect a
b.Standard- Definition TV: Connect the composite video using a composite (RCA phono) cable.
2.Determine if you are connecting the audio to a home theater receiver or directly to the TV:
a.For an HDMI or
b.If the receiver or TV has a digital audio (S/PDIF) input, use the digital audio optical (S/PDIF) output. Otherwise, use the baseband left and right audio out outputs.
3.Locate the cabling diagram(s) that best match the subscriber’s configuration.
4.Connect the audio and video cables in a manner matching that diagram.
5.Determine if you are connecting to a data device (see Data Device Connections). For installation details, refer to the instructions included with the data device.
6.Connect the cable terminal to the coaxial cable wall outlet.
7.Perform the operational check for the remote control.
8.Optimize the
17 |