Diagnostics
B
FieldDescription
employed on the 1394 interface
•Copy Control - level of copy control in the 1394 content. Valid values include: ‘Copy Free’, ‘Copy Once’, ‘No Copies’, ‘Copy Never’.
•Nodes - indicates if the
•Loop Detected - indicates if a loop exists on the 1394 bus.
•EUI – device identifier
•Number of connected devices and associated device Identifier
•MPEG4 Passthrough – indicated if MPEG4 content is passed through to the 1394 device. The user can enable or disable MPEG4 Passthrough by pressing the MENU key while on the 1394 Status OSD diagnostics screen (selection mode is indicated by ‘>>>’), then pressing SELECT key to toggle between Enable and Disable.
DVR/Hard Drive Status
This
Figure 41: DVR/Hard Drive Status Diagnostic Screens
| 80 |