Motorola DCX3510-M Operational Check for the Remote Control, Operational check procedures

Page 38

Installation

Operational Check for the Remote Control

The operational check tests communication with the remote control:

 

Table 3: Operational check procedures

 

 

Feature

Testing Procedure

 

 

Power on

Press power on the remote control to turn on the DCX3510-M.

 

Tune to the output channel (3 or 4), if using the RF output.

B

Channel

Scan through the channels using the channel + or - keys.

selection

Tune to several channels by entering the channel number using the numeric keys.

 

 

 

Volume

Press volume + or - on the remote control to increase the volume to its upper limit,

control

lowest level, and to a comfortable level.

 

Press mute to turn the sound off. Press mute again to restore the sound.

 

 

If the DCX3510-M does not operate properly, refer to the Troubleshooting section.

High-Definition DVR DCX3510-M • Installation Manual

31

365-095-17066-x.1

Image 38
Contents DCX3510-M Page Safety & Regulatory Information During Transportation to the Subscriber HomeDuring Installation FCC ComplianceFCC Declaration Of Conformity Recycling your Motorola EquipmentYou may You may notGovernment Restricted Rights Contents Troubleshooting Configuring the User SettingsDiagnostics Figures Figures 1Introduction Tuners FeaturesStandard Audio/Video Features Standard Digital Hdtv Channels Standard DVR FunctionalityDVR recording time guidelines ChannelsIf You Need Help Standard Data FeaturesStandard Miscellaneous Features Calling for Repairs Front Panel Front panelVideo Format Indicators Front Panel Display Rear Panel CardCold Reset Procedure Remote Control Cold ResetClearing the Hard Drive YPbPr Video Connection OptionsComponent Hdmi or IEEE-1394Digital audio optical Audio Connection OptionsAudio Connection Options Installation Overview IEEE-1394 Connecting an Hdtv Single Connection for Video/AudioCable Connecting an Hdtv Single Connection for Video/Audio Audio Connecting an Hdtv Separate Video/Audio ConnectionsComponent Video YPbPr Connecting an Hdtv Separate Video/Audio Connections Connecting an A/V Receiver Audio Connecting an A/V Receiver Audio Connecting a Standard-Definition TV Sdtv Connecting a Standard-definition TV SdtvInstallation Installation Connecting an A/V Receiver, SDTV, and VCR Connecting an A/V Receiver, SDTV, and VCR Connecting to an External eSATA DVR/Hard Drive Connecting to an External eSATA DVR/Hard DriveData Features Data Device ConnectionsOperational Check for the Remote Control Operational check proceduresConfiguring the User Settings User Settings Menu Main Screen Default User Settings Menu-No Hdmi ConnectionDefault User Settings Menu -With Hdmi Connection HDMI/YPbPr User Settings-Main Menu Field DescriptionsTV Type OutputOverride Native ModeSettings AdditionalAdvanced CaptionSubtitle Audio/VideoNative Mode Settings Screen Native Mode Settings Menu ScreenNative Mode Settings Field Descriptions 480p Restore DefaultNative Settings EnhancedAdditional Hdmi Settings Screen Additional Hdmi Settings ScreenColor Space Additional Hdmi Settings Field DescriptionsHDMI/DVI Mode Audio OutputLip Sync Delay Menu Restore Default Hdmi SettingsAdditional Closed Caption Settings Screen Additional Closed Caption Settings Menu ScreenAdditional Closed Caption Settings Field Descriptions Subtitle and DVS Settings Screen Subtitle and DVS Settings Menu ScreenSubtitles Subtitle and DVS Settings Field DescriptionsDescriptive Video Service LanguageAdvanced Audio/Video Settings Screen Advanced Audio/Video Settings Menu ScreenGraphics Overlaying the Video Advanced Audio/Video Settings Field DescriptionsDolby Volume Video Sharpness5Diagnostics Using the DiagnosticsDiagnostic Main Menu Screen General StatusConnected State ErrorError Code Description Platform IDPurchase Status Purchase Status Diagnostic Field Descriptions OOB Status Diagnostic Screen Out-Of-Band OOB StatusOOB Diagnostic Field Descriptions Network PID Hunt ModeAgile OOB Tuner Hunting High-Definition DVR DCX3510-M Installation Manual In-Band Status Diagnostic Screen In-Band StatusIn-Band Status Diagnostic Field Descriptions Unit Address Diagnostic Screen Unit AddressUnit Address Diagnostic Field Descriptions Separable Security Diagnostic Field Descriptions Separable SecurityMSO Phone Number CableCARDCurrent Channel Status Diagnostic Screens Current Channel StatusCurrent Channel Status Diagnostic Field Descriptions SDV Client TunedRC Flag RF Upstream Modem Diagnostic Screen RF Modem UpstreamRF Upstream Modem Front Panel Display Level RF Upstream Modem Diagnostic Field DescriptionsCode Modules Back AddressFront Panel Display For Code Modules Code Modules Diagnostic Field Descriptions Postponed System RAM The allocated system RAM in MB Memory ConfigurationAudio/Video Status Flash Allocated flash memory in MBLFE Low Pdif OutputOSD Display Description Frequency EffectSt Caption Row Caption Detected OSD Display Description Audio / VideoMute OSD Display DefinitionInput Sources Digital SubtitleOutput Format Interface Status Diagnostic Screens Interface StatusInterface Status Diagnostic Field Descriptions DVR/Hard Drive Status Diagnostic Screens DVR/Hard Drive StatusDVR/Hard Drive Status Diagnostic Field Descriptions Max Temp StateTemp F Over TempAcquire DS Channel Docsis EnabledDocsis Status Obtain USEstablish IP Configuration FileNetwork Access ConnectivityPower Level Srvr # IP Addr Application Specific InformationServer# Name Interactive Status Diagnostic Screen Interactive StatusUpstream ID Interactive Status Diagnostic Field DescriptionsIP Address Downstream IDInitstopped Connected Home Diagnostic Screens Connected HomeConnected Home Diagnostic Field Descriptions MAC/IPRemote Will not power onDCX3510-M Control does notNo graphics or There is no videoOn the TV screen Program guidesSides There are blackBars on all four PictureMotorola Mobility, Inc