Motorola DCX3510-M installation manual Purchase Status Diagnostic Field Descriptions

Diagnostics

B

Purchase Indicator

		On when IPPV is	Number of
		enabled	unsent purchases
		Figure 24: Front panel display for Purchase Status diagnostic
		Table 11: Purchase Status Diagnostic Field Descriptions
	Field	Description
	Unsent	The number of purchases in the DCX3510-M remaining to be polled. It can be an integer
		from 0 to 63.
	Unack	The number of reports that have not been acknowledged by the controller. It is an integer.
	Last Seq	The last acknowledged sequence number of a purchase sent by the controller. It is a 16-
	Num	bit, unsigned hexadecimal number.
	Last RB Time	The last time the DCX3510-M attempted to report back purchases to the controller, in
		GPS seconds.
	IPPV Status	If IPPV is enabled, the IPPV status indicator is on. If IPPV is disabled, the IPPV status
		indicator is off.
	Prep CMD	“Last Prepare for Poll Command” sequence number and time of the last prepare for poll
		request command that was sent by the controller. Note that each requesting process
		maintains an independent sequence of poll requests to uniquely identify the poll
		responses.
	Prep ACK	“Last Prepare for Poll Acknowledge” sequence number and time of the last Report
		Purchase request sent by the controller.
	Poll Request	Sequence number and time of the last send poll buffer command that was sent by the
		controller.
	Poll	Sequence number and time of the last Poll Acknowledge message sent by the controller.
	Acknowledge
	Stack Unit	Unit used in purchase processing.
	Show Count	Count used in purchase processing.
	Credit Total	Credit used for purchase processing.
High-Definition DVR DCX3510-M • Installation Manual			54
365-095-17066-x.1