Diagnostics
Separable Security
B
This diagnostic displays information on the inserted
|
| Figure 31: Separable Security Diagnostic Screen |
| Table 15: Separable Security Diagnostic Field Descriptions | |
|
| |
Field | Description | |
|
| |
CARD Interface | CableCARD Interface is a status indication of the interface between the Host and | |
| CableCARD. It will indicate “Good” if no errors are detected, “Error” if there is an | |
| error establishing the CableCARD interface, or “Unsupported CARD” if the inserted | |
| CableCARD is not an | |
|
| |
CableCARD ID | The unique identifier provided by the CableCARD. | |
|
| |
Host ID | The unique identifier in the Host Device Certificate. | |
|
| |
Data ID | A value generated by the CableCARD for the Pairing report. | |
|
|
|
Validation | • | UKNOWN if a Validation message was not received by the product. |
| • | VALID or INVALID as set by the Host Validation Message received from the |
|
| headend. |
| • | BINDING if the CableCARD is busy with the binding authentication process. |
| • | NOT BOUND if Card validation status is not bound for CableCARD reasons. |
| • | HOST CERTIFICATE INVALID if the status is not bound because the Host Certificate |
|
| was invalid. |
| • | HOST SIGN FAILED if status is not bound because of failure to verify Host’s SIGN. |
| • | AUTH KEY FAILED if status is not bound because of failure to match AuthKey from |
|
| the Host Device. |
| • FAILED if binding failed for other reasons. | |
|
| |
Pairing Rpt | Set to MMI or Reportback as received by a message from the headend, or set to | |
Method | Unknown if the headend message was not received. | |
|
|
|
| 63 |