Motorola DCX3510-M Connecting an Hdtv Single Connection for Video/Audio, Cable, IEEE-1394

Installation

B

Connecting an HDTV — Single Connection for Video/Audio

This section describes steps to connection the DCX to an HDTV using connection options that combine video and audio into a single cable.

Cable In

Connect an RF coaxial cable to the cable wall outlet and the cable in connector on the DCX set-top.

HDMI

If the TV has an HDMI input, this is for both audio and video if you are using the TV speakers. Connect a Standard HDMI cable to the TV and to the HDMI connector on the DCX set-top.

IEEE-1394

If the HDTV has an IEEE-1394 connector, you can use the IEEE-1394 for both the video and audio connection:

Connect an IEEE-1394 cable to the IEEE-1394 connector on the HDTV and DCX set-top.

Note: On-screen graphics are not displayed when you are using the IEEE-1394 connection on the rear panel of the DCX set-top.

If there is an audio/video receiver and you are not using the TV’s speakers, go to Connecting an A/V Receiver — Audio.

Because HDMI and IEEE-1394 provide both video and audio output, no additional audio connections to the TV are required if you use either of these connections.

High-Definition DVR DCX3510-M • Installation Manual 18

365-095-17066-x.1