Motorola DCX3510-M installation manual Initstopped

Diagnostics

B

Field	Description
	S I	INIT_STOPPED	The DCX3510-M is in the interactive
			initialization state and the TransMode
			has stopped.
	r dc	RUN_WAIT_DC_OR_C	The DCX3510-M is in the interactive
			state and waiting for the default
			configuration or the contention
			channel list messages.
	r	RUNNING	Interactive state is running, sending
			idle messages, and waiting for any
			prepare for poll or MAC messages.
	S	RUN_STOPPED	The interactive run state has stopped
			and DCX3510-M is waiting for status
			or a transmission control message.
	00	INVALID	The interactive state is unknown or
			invalid.

MAC Abort Cntr This counter increments every time the MAC layer reaches the cell abort count limit. It is reset by the successful upstream transmission of a cell: for example, when the DCX3510-M receives an ACK. If the counter reaches the MAC abort count limit, the DCX3510-M assumes the MAC layer is unavailable due to noise, congestion, or some other problem. The DCX3510-M stops transmitting data upstream, reports an error to the calling function, and attempts to re-enter the network using the initialization process. 0000 is displayed as the default or the MAC Abort CNTR is unconfigured or unknown.

Socket Port State The socket mode and activity:

•UNUSED — The socket is not being used.

•OPENED — The socket is open.

•READY — The socket is ready to send or receive.

•RECEIVING — The socket is receiving data from the application server.

•SENDING — The socket is sending data to the application server.

•UNKNOWN — The socket state is invalid or unknown.

High-Definition DVR DCX3510-M • Installation Manual 89

365-095-17066-x.1