Motorola DCX3510-M installation manual Tuned, RC Flag, SDV Client

Diagnostics

B

	Field	Description
	Tuned	(Digital channels only) The center RF carrier frequency for the digital service. It can be
	Frequency	From 54 to 860 MHz.
	VCT ID	Virtual Channel Table ID
	SOC	The Selectable Output control is enabled or disabled.
	CCI	The copy control information:
		00 — copy free
		01 — no more copies
		10 — copy once
		11 — never copy
		N/A — the value is invalid or cannot be retrieved
	APS	The Analog Protection System; for example, Macrovision:
		00 — no Macrovision
		11 — Type 3 Macrovision
		N/A — the value is invalid or cannot be retrieved
	RC Flag	Displays whether the broadcast flag is present:
		0 — no flag/not defined
		1 — the flag is present/enabled
		N/A — the value is invalid or cannot be retrieved
	CIT	The constrained image trigger, as delivered in the PRK or the Set DRM API:
		1 — set
		0 — not set
		N/A — the value is invalid or cannot be retrieved
	DRM	The digital rights management valid flag bit:
		1 — set
		0 — not set
		N/A—the value is invalid or cannot be retrieved
	RS	The retention state:
		Forever, 1 week, 2 days, 1 day, 12 hours, 6 hours, 3 hours, 90 minutes, or Not Defined
		N/A —value is invalid or cannot be retrieved
	SDV Client	If Switched digital video is available, the following information is related to the SDV
	Status	Client:
		•	Status of client
		• IP Address of primary switched video manager (SVM) server
		• IP Address of secondary switched video manager (SVM) server
		• IP Address of Auto Discovery server
		•	SDV Mode
High-Definition DVR DCX3510-M • Installation Manual				67
365-095-17066-x.1