Motorola DCX3510-M Additional Hdmi Settings Field Descriptions, HDMI/DVI Mode, Color Space

Page 49

Configuring the User Settings

B

 

Table 6: Additional HDMI Settings Field Descriptions

 

 

Setting

Description

 

 

HDMI/DVI Mode

Allows you to optimize the HDMI output to work with both DVI-equipped

 

televisions and HDMI-equipped televisions. HDMI is the default setting.

 

HDMI—Optimized to work with an HDMI television or home theater receiver.

 

DVI—Optimized to work with a DVI television or display device (connected via

 

an HDMI-to-DVI adapter).

 

 

Color Space

Allows you to adjust the color space used by the DCX3510-M to generate the

 

video signals on the HDMI output. YCC 4:4:4 is the default setting.

 

YCC 4:4:4—Generates video signals within the YCC color space.

 

RGB—Generates video signals within the RGB color space.

 

Note: Adjusting these settings could result in a loss of video. Only a professional

 

installer or someone with a good working knowledge of the color spaces

 

supported by the TV should change this setting.

 

 

Audio Output

Allows you to specify the digital audio format delivered over the HDMI output by

 

the DCX3510-M. Options include Auto, L-PCM, and Pass Through. Auto option

 

is the default setting.

 

Auto—Provides the digital audio format specified by the connected device (TV

 

or home theater receiver) when that device was first connected to the

 

DCX3510-M.

 

L-PCM—Provides all audio in the Linear Pulse Code Modulation digital audio

 

format. The L-PCM format is widely supported by most HDMI televisions and

 

home theater receivers.

 

Pass Through—Provides the same digital audio format on the HDMI output

 

as is provided with the program being viewed at that time. For example, if the

 

program has a Dolby Digital soundtrack, the DCX3510-M passes the Dolby

 

Digital audio to the HDMI output. This option is most useful when connecting

 

the DCX3510-M to a home theater receiver that has HDMI switching

 

capability.

 

Note: Adjusting these settings could result in a loss of audio. Only a professional

 

installer or someone with a good working knowledge of the digital audio formats

 

supported by the TV and/or home theater receiver should change this setting

 

 

Lip Sync

Allows you to adjust the amount of time the audio signal is delayed with respect

 

to the video signal on the HDMI output. Some HDMI televisions and home

 

theater receivers add an extra delay to the video signal during processing which

 

can produce an effect where the audio noticeably “leads” the video.

 

By default, this option is set to Auto. The options are used as follows:

 

Auto—The DCX3510-M automatically delays the audio signal on the HDMI

 

output by the amount of time requested by the connected HDMI device.

 

Manual—The DCX3510-M delays the audio signal on the HDMI output by the

 

amount of time selected for the Lip Sync Delay setting.

 

Off—The DCX3510-M will not delay the audio signal on the HDMI output.

 

 

High-Definition DVR DCX3510-M • Installation Manual

42

365-095-17066-x.1

Image 49
Contents DCX3510-M Page During Transportation to the Subscriber Home Safety & Regulatory InformationFCC Compliance During InstallationRecycling your Motorola Equipment FCC Declaration Of ConformityYou may not You mayGovernment Restricted Rights Contents Diagnostics Configuring the User SettingsTroubleshooting Figures Figures 1Introduction Standard Audio/Video Features FeaturesTuners DVR recording time guidelines Standard DVR FunctionalityStandard Digital Hdtv Channels ChannelsStandard Miscellaneous Features Standard Data FeaturesIf You Need Help Calling for Repairs Front panel Front PanelVideo Format Indicators Front Panel Display Card Rear PanelRemote Control Cold Reset Cold Reset ProcedureClearing the Hard Drive Component Video Connection OptionsYPbPr Hdmi or IEEE-1394Audio Connection Options Audio Connection OptionsDigital audio optical Installation Overview Cable Connecting an Hdtv Single Connection for Video/AudioIEEE-1394 Connecting an Hdtv Single Connection for Video/Audio Component Video YPbPr Connecting an Hdtv Separate Video/Audio ConnectionsAudio Connecting an Hdtv Separate Video/Audio Connections Connecting an A/V Receiver Audio Connecting an A/V Receiver Audio Connecting a Standard-definition TV Sdtv Connecting a Standard-Definition TV SdtvInstallation Installation Connecting an A/V Receiver, SDTV, and VCR Connecting an A/V Receiver, SDTV, and VCR Connecting to an External eSATA DVR/Hard Drive Connecting to an External eSATA DVR/Hard DriveData Device Connections Data FeaturesOperational check procedures Operational Check for the Remote ControlConfiguring the User Settings Default User Settings Menu-No Hdmi Connection User Settings Menu Main ScreenDefault User Settings Menu -With Hdmi Connection TV Type User Settings-Main Menu Field DescriptionsHDMI/YPbPr OutputSettings Native ModeOverride AdditionalSubtitle CaptionAdvanced Audio/VideoNative Mode Settings Menu Screen Native Mode Settings ScreenNative Mode Settings Field Descriptions Native Settings Restore Default480p EnhancedAdditional Hdmi Settings Screen Additional Hdmi Settings ScreenHDMI/DVI Mode Additional Hdmi Settings Field DescriptionsColor Space Audio OutputMenu Restore Default Hdmi Settings Lip Sync DelayAdditional Closed Caption Settings Menu Screen Additional Closed Caption Settings ScreenAdditional Closed Caption Settings Field Descriptions Subtitle and DVS Settings Menu Screen Subtitle and DVS Settings ScreenDescriptive Video Service Subtitle and DVS Settings Field DescriptionsSubtitles LanguageAdvanced Audio/Video Settings Menu Screen Advanced Audio/Video Settings ScreenDolby Volume Advanced Audio/Video Settings Field DescriptionsGraphics Overlaying the Video Video SharpnessUsing the Diagnostics 5DiagnosticsGeneral Status Diagnostic Main Menu ScreenError Code Description ErrorConnected State Platform IDPurchase Status Purchase Status Diagnostic Field Descriptions Out-Of-Band OOB Status OOB Status Diagnostic ScreenOOB Diagnostic Field Descriptions Agile OOB Tuner Hunting Hunt ModeNetwork PID High-Definition DVR DCX3510-M Installation Manual In-Band Status In-Band Status Diagnostic ScreenIn-Band Status Diagnostic Field Descriptions Unit Address Unit Address Diagnostic ScreenUnit Address Diagnostic Field Descriptions Separable Security Separable Security Diagnostic Field DescriptionsNumber CableCARD MSO PhoneCurrent Channel Status Current Channel Status Diagnostic ScreensCurrent Channel Status Diagnostic Field Descriptions RC Flag TunedSDV Client RF Modem Upstream RF Upstream Modem Diagnostic ScreenRF Upstream Modem Front Panel Display Code Modules RF Upstream Modem Diagnostic Field DescriptionsLevel Back AddressFront Panel Display For Code Modules Code Modules Diagnostic Field Descriptions Postponed Audio/Video Status Memory ConfigurationSystem RAM The allocated system RAM in MB Flash Allocated flash memory in MBOSD Display Description Pdif OutputLFE Low Frequency EffectMute Audio / VideoSt Caption Row Caption Detected OSD Display Description OSD Display DefinitionOutput Format Digital SubtitleInput Sources Interface Status Interface Status Diagnostic ScreensInterface Status Diagnostic Field Descriptions DVR/Hard Drive Status DVR/Hard Drive Status Diagnostic ScreensDVR/Hard Drive Status Diagnostic Field Descriptions Temp F StateMax Temp Over TempDocsis Status Docsis EnabledAcquire DS Channel Obtain USNetwork Access Configuration FileEstablish IP ConnectivityPower Level Server# Name Application Specific InformationSrvr # IP Addr Interactive Status Interactive Status Diagnostic ScreenIP Address Interactive Status Diagnostic Field DescriptionsUpstream ID Downstream IDInitstopped Connected Home Connected Home Diagnostic ScreensMAC/IP Connected Home Diagnostic Field DescriptionsDCX3510-M Will not power onRemote Control does notOn the TV screen There is no videoNo graphics or Program guidesBars on all four There are blackSides PictureMotorola Mobility, Inc