Motorola QIP7000 installation manual Connecting to the ONT

Page 26

Installation

B

5.If Clr is displayed, press any other key to reset the terminal and turn it off to complete the clearing process.

Connecting to the ONT

If necessary, connect to the ONT to the home coaxial network. This example shows

connecting the Motorola ONT1000 model which does not have embedded Multimedia

over Coax Alliance (MoCA) technology.

CAUTION

Be sure the coaxial cabling on the customer premises is not connected to any digital

network or satellite dish.

Determine how to route the coaxial and Ethernet cables from the ONT into the home.

You may need to move an existing cable drop from its present location to where the

ONT is mounted.

To connect to the Motorola ONT1000:

1.

Open its door.

2.

Connect the customer’s premises coaxial cable wiring to the CABLE OUT port.

3.

Connect the customer’s premises Ethernet cabling to the ETHERNET port.

4.

If necessary, route the coaxial and Ethernet cables into the house.

5.

Close the ONT door and secure the ONT.

Figure 12 – Connecting to the ONT1000


QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual		18
574702-001 a	This document is uncontrolled pending incorporation in a Motorola CMS

Image 26

Contents QIP7000 P2 Series Page Safety and Compliance During Installation FCC Declaration of Conformity Contents D02 Operational Check for the Remote ControlD01 D03Figures 1Introduction QIP7232 Front and rear views Features TunersStandard Data Features Company From USA or Canada Outside USA or Canada Getting HelpCalling for Repairs Label Description Front PanelRear Panel Card Lable DescriptionSystem Overview PON OverviewFttp PON carries the following services Service DescriptionWhole Home IP Video CPE overview WAN LAN MoCAOOB Multi-Room DVR Multi room DVR networkInstallation Whole Home IP Video Network InstallationConnect to the ONT During the installationBefore You Begin After you finish connecting the components Checking the Home Coaxial Network TopologyIf you make any changes to the network, repeat steps 1 Video Connection OptionsMarginal MoCA network performance Connection TV Type DescriptionConnection Type Description Audio Connection OptionsClearing the Hard Drive Connecting to the ONT Connecting to the ONT with embedded MoCA MoCA technologyONT1000M Connections Key Name DescriptionConnecting the Home Router embedded MoCA ONT Connecting Homes with Multiple Existing Cable DropsConnecting the Home Router Installation Overview Determine if you are connecting to aCabling to an Hdtv for Video Cabling to an HdtvCabling to an Hdtv for Audio Cabling to an Hdtv for AudioCabling to an Hdtv and A/V Receiver for Video Cabling to an Hdtv and A/V Receiver Cabling to a Standard-Definition TV Cabling to a Standard Definition stereo TVCabling to a Standard-Definition TV, A/V Receiver and VCR Cabling to a Standard Definition TV, A/V Receiver and VCRPort type Description Data Device ConnectionsQIP7000 series front panel provides Feature Testing Procedure Operational Check for the Remote ControlOptimizing the High-Definition Settings Verifying the MoCA NetworkSetting Description Setting Description Graphics Overlaying the Video 4Diagnostics Using the DiagnosticsD01 General Status Example General Status display no error ROM ID General Status fields areField Description Front panel display for Purchase Status diagnostic D02 Purchase StatusPurchase Status fields are FieldFront panel display for the OOB diagnostic D03 Out-Of-Band OOB StatusOut-Of-Band Status fields are Agile OOB Tuner Hunting Front panel display for in-band diagnostic D04 In-Band StatusIn-Band Status fields are Carrier locked Carrier not locked PCR LockD05 Unit Address/Security Front panel display of a unit addressEMM EMM Separable SecurityUnit Address fields are SCC SccecmSeparable Security fields are SignD06 Current Channel Status Current Channel status fields are DigitalCIT CCIAPS DRMD07 Upstream Status Ethernet Return front panel displayEthernet Return fields are D08 Code Modules Front panel display for code modules Code Modules fields are D09 Memory Configuration NvramIEC958PCM D10 Audio/Video StatusAudio Spdif Unmuted BlackField Description D11 Interface/Port Status Page Interface Status fields are D12 User Setting Status Definition 480i format 720 x 480 pixels D13 DVR/Hard Drive Status DVR/Hard Drive Status fields are OSDD14 Application Specific Information Interactive Status fields are UnconfigD15 Interactive Status MacconnectWaitsoack InitwaitdcorcWaitlmack WaitlaorsoConnected Home Status fields are This diagnostic displays the MoCA network statusD16 Connected Home TX Data Rate Connected Home Link Status fields areD17 Key Pad / LED Test 5Troubleshooting Problem Possible SolutionProblem Possible Solution Off standby IP Network Issues Insufficient RF Network ThroughputUsing a diplexer to bypass a line amplifier Bypassing an Amplifier