Motorola QIP7000 installation manual General Status fields are, Field Description, Rom Id

Page 45

Diagnostics

The General Status fields are:

B


	Field		Description

	Error	Error codes display on the front panel and OSD when an error occurs. If multiple errors
			occur, the last recorded error is displayed:

			Error Code		Description

			EP00		No error

			EP01		Not connected

			EP03		DRAM error

			EP04		SRAM error

			EP07		ROM verification failure

			EP08		RAM test failure

			EP09		Battery test failure

			EP11		Invalid unit address

			EP12		Power on self test failure

			EP14		GITV startup failure

			EP15		TSI structure corrupt

			EP18		Driver initialization failure

	Connected State		A QIP-operations connect or disconnect message determines whether the QIP7000
			series is CONNECTED or DISCONNECTED.

	Platform ID	A unique, 16-bit hexadecimal number that identifies the platform image (also called the
			ROM ID).

	Family ID		The manufacturer and product family, in hexadecimal.

	Model ID		The model, in hexadecimal.

	Remod Chan		The interface to the subscriber TV; channel 3 or 4 in the USA.

	Set-top Time	The current OOB time displayed in global positioning system (GPS) seconds from Jan 6,
			1980. It is an integer from 0 to 4294967295.

	Decryption Mode		Indicates secure processor decrypt scheme:
			•	CSA — connect scrambler algorithm
			•	DES — Data Encryption Standard


QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual		37
574702-001 a	This document is uncontrolled pending incorporation in a Motorola CMS

Image 45

Contents QIP7000 P2 Series Page Safety and Compliance During Installation FCC Declaration of Conformity Contents D01 Operational Check for the Remote ControlD02 D03Figures 1Introduction QIP7232 Front and rear views Tuners FeaturesStandard Data Features Getting Help Calling for RepairsCompany From USA or Canada Outside USA or Canada Front Panel Rear PanelLabel Description Lable Description CardPON Overview System OverviewService Description Fttp PON carries the following servicesWhole Home IP Video CPE overview MoCA OOBWAN LAN Multi room DVR network Multi-Room DVRWhole Home IP Video Network Installation InstallationDuring the installation Before You BeginConnect to the ONT Checking the Home Coaxial Network Topology After you finish connecting the componentsMarginal MoCA network performance Video Connection OptionsIf you make any changes to the network, repeat steps 1 Connection TV Type DescriptionAudio Connection Options Clearing the Hard DriveConnection Type Description Connecting to the ONT MoCA technology Connecting to the ONT with embedded MoCAKey Name Description ONT1000M ConnectionsConnecting Homes with Multiple Existing Cable Drops Connecting the Home RouterConnecting the Home Router embedded MoCA ONT Determine if you are connecting to a Installation OverviewCabling to an Hdtv Cabling to an Hdtv for VideoCabling to an Hdtv for Audio Cabling to an Hdtv for AudioCabling to an Hdtv and A/V Receiver for Video Cabling to an Hdtv and A/V Receiver Cabling to a Standard Definition stereo TV Cabling to a Standard-Definition TVCabling to a Standard Definition TV, A/V Receiver and VCR Cabling to a Standard-Definition TV, A/V Receiver and VCRData Device Connections QIP7000 series front panel providesPort type Description Optimizing the High-Definition Settings Operational Check for the Remote ControlFeature Testing Procedure Verifying the MoCA NetworkSetting Description Setting Description Graphics Overlaying the Video Using the Diagnostics 4DiagnosticsD01 General Status Example General Status display no error General Status fields are Field DescriptionROM ID D02 Purchase Status Front panel display for Purchase Status diagnosticField Purchase Status fields areD03 Out-Of-Band OOB Status Front panel display for the OOB diagnosticOut-Of-Band Status fields are Agile OOB Tuner Hunting D04 In-Band Status Front panel display for in-band diagnosticCarrier locked Carrier not locked PCR Lock In-Band Status fields areFront panel display of a unit address D05 Unit Address/SecurityUnit Address fields are Separable SecurityEMM EMM SCC SccecmSign Separable Security fields areD06 Current Channel Status Digital Current Channel status fields areAPS CCICIT DRMEthernet Return front panel display D07 Upstream StatusEthernet Return fields are D08 Code Modules Front panel display for code modules Code Modules fields are Nvram D09 Memory ConfigurationD10 Audio/Video Status Audio SpdifIEC958PCM Black UnmutedField Description D11 Interface/Port Status Page Interface Status fields are D12 User Setting Status Definition 480i format 720 x 480 pixels D13 DVR/Hard Drive Status OSD DVR/Hard Drive Status fields areD14 Application Specific Information D15 Interactive Status UnconfigInteractive Status fields are MacconnectWaitlmack InitwaitdcorcWaitsoack WaitlaorsoThis diagnostic displays the MoCA network status D16 Connected HomeConnected Home Status fields are Connected Home Link Status fields are TX Data RateD17 Key Pad / LED Test Problem Possible Solution 5TroubleshootingProblem Possible Solution Off standby Insufficient RF Network Throughput IP Network IssuesBypassing an Amplifier Using a diplexer to bypass a line amplifier