Motorola QIP7000 installation manual DVR/Hard Drive Status fields are, Osd

Diagnostics

B

The DVR/Hard Drive Status fields are:

Field	Description
Enabled	Indicates whether the DVR is enabled, based on the QIP7000 series Connected
	State (CONNECTED or DISCONNECTED) and resource availability (resource
	authorized; hard disk installed and functional):
	OSD	Front Panel	Description
	True	En	DVR enabled
	False	Un	DVR disabled
Stream Indexer	The stream indexer version number, without leading zeros; for example,
Ver.	version 0000000065 is displayed as “65”.
Content Record	The content record version number, displayed without leading zeros.
Ver.
Drive	The drive type — IDE (internal), 1394, USB (external), or NOT AVAILABLE
	(neither enabled nor configured).
Record Capacity	The remaining recording capacity, in bytes.
Remaining
Number of	The number of internal and external hard drives, up to a maximum of 9.
Installed Drives
Drive	The identification number sequentially assigned to each installed drive and
	whether the drive is Internal or External.
Model Number	The drive model number assigned at the factory.
Device ID	A text string of up to 20 characters that identifies the disk drive; “N/A” is
	displayed if the value is invalid or cannot be retrieved.
Type	The drive type — IDE, 1394, USB, or Unknown).
Total Size	The drive size in decimal GB. (1 decimal GB = 1x109 bytes. For example,
	120 decimal GB = 120x109 bytes).
System, GPFS,	The space used and allocated in MB for each of the internal hard drive’s
DVR Content,	partitions —System, GPFS, DVR Content, and DVR Index (1 binary MB = 220
and DVR Index	bytes). “N/A” displays if the value is invalid or cannot be retrieved.
State	The hard drive state:
	Standby — The hard drive is working normally, but is at rest (the State returns
	to Active any time disc access is necessary).
	Active — The hard drive is accessing data.
	Failed — The hard drive hardware has failed.
Temp (F)	For an internal hard drive only, its temperature in degrees F.
Max Temp	For an internal hard drive only, its maximum temperature in degrees F.
Over Temp	Indicates whether the drive is excessively hot:
	Yes — The internal drive temperature exceeds 140º F (60º C). The front panel
	Over-Temp Indicator is on and remains lit until the next over-temp sample is
	taken (at least once an hour).
	No — There is no over-temp problem.
Count	The cumulative number of times that the hard drive temperature has been
	measured over 60º C, with the temperature checked at least once an hour.

QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual		66
574702-001 a	This document is uncontrolled pending incorporation in a Motorola CMS