Divar XFIntroduction en 15
2.3 | Installation environment |
2.3.1 | Mounting |
| The Divar XF is supplied as a desktop unit. If desired, the unit can be rack mounted using the |
| rack mounting kit supplied with the unit. |
2.3.2 | Ventilation |
| Ensure that the location planned for the installation of the unit is well ventilated. Take note of |
| the locations of the cooling vents in the unit's enclosure and ensure that they are not |
| obstructed. |
2.3.3 | Temperature |
| Observe the unit's ambient temperature specifications when choosing an installation space. |
| Extremes of heat or cold beyond the specified operating temperature limits may cause the |
| unit to fail. Do not install the unit on top of hot equipment. |
2.3.4 | Power Supply |
| Ensure that the site's AC power supply is stable and within the rated voltage of the unit. If the |
| site's AC power is likely to have spikes or power dips, use power line conditioning or an |
| uninterrupted power supply (UPS). |
2.4 | Associated equipment | |
| A typical system could contain the following components (not included with the unit): | |
| – A primary monitor for multiscreen monitoring (monitor A) | |
| – A second monitor for spot/alarm monitoring (monitor B) | |
| – Cameras with 1 Vpp composite video outputs | |
| – IP cameras (see datasheet for supported models) | |
| – | Amplified microphone(s) |
| – Audio amplifier with speaker(s) | |
| – Video coaxial cable with BNC connectors for connecting the video signals | |
|
| Audio cable with RCA connectors for connecting audio signals. |
| – AC power supply outlet for the unit that allows for secure isolation (the unit has no on/ | |
|
| off switch for security reasons) |
| – | A KBD keyboard |
| – PC for Control Center and Configuration Tool applications | |
| – | Pan/tilt/zoom control units |
Bosch Security Systems | Installation manual | F.01U.135.429 2.5 2009.08 |