Bosch Appliances XF installation manual 6.8Network, 6.7.5Copy, 6.8.1Setup

Divar XF Advanced configuration menu en 65

6.7.5Copy

The copy event settings function makes it easy to set up a large number of events for all profiles and all cameras. The copy function copies content from within a single profile to other profiles. The camera inputs and the action types within each of these profiles can be selected. To copy event settings:

1.Check the Copy multiple cameras box if you wish to copy several camera inputs within the From profile.

2.Select the profile number to copy from.

3.Highlight the profiles to copy to (highlight the un-numbered box to select all).

4.Select the camera input(s) to be copied from, for the profile to be copied.

5.Select the camera inputs to be copied to (hightlight the un-numbered box to select all).

6.Check only those actions (General, Contact, Motion or Video loss) that you wish to copy.

7.Click Copy.

6.8Network

Figure 6.9 Network menu - Setup

6.8.1Setup

–Enter a DVR name to be used on the network.

–If Discovery is enabled, the Control Center can carry out automatic discovery and read the IP address of the unit.

–Enable DHCP to have IP address, subnet mask, and default gateway assigned automatically by the network server. The actual values are displayed.

Bosch Security Systems Installation manual F.01U.135.429 2.5 2009.08